Intended Uses Awlcraft 3000 is a two component, premium polyurethane finish that is easy to apply and delivers a high gloss finish in a wide range of colors with enhanced color and gloss retention. * Provides a buffable, high gloss finish * Fast drying and easy to apply * Uses the AkzoNobel color platform (YSC toners) for a truer, more consistent and more vibrant finish. Awlcraft 3000 is specifically developed for Professional use and spray application only. Do not use below the waterline. Specification Data Volume Solids Specific Gravity Available Packs Base Equipment Cleaning Typical Shelf Life 46.6% (average, unthinned) 1 US Quart, 1 US Gallon Awlcraft 3000 (range of colors) T0001 - Fast Evaporating Reducer-Spray T0002 - Very Fast Evaporating Reducer-Spray T0005 - Hot Weather Reducer - Spray Base - 3 Years; Converter - 2 Years Theoretical Coverage Surface Preparation The surface preparation advice provided, and equipment suggestions, can be used as a guide. Preparation techniques and results will vary according to individual conditions, equipment choice/condition and other factors. Testing on a non-critical area should be carried out prior to full-scale preparation. The surface should be sanded with P320-P400 and cleaned with Surface Cleaner (T0170 US & T0340 EU). Best results are achieved when sprayed over properly prepared 545 Epoxy Primer or Quick Build. May be applied directly over some existing finishes. The existing finish must be sound, tightly adhered to the substrate, and chemically compatible with Awlcraft 3000. Mixing & Reduction Mixing and reduction requirements will vary according to individual conditions, climate, equipment choice/condition and other factors. Mixing and application of a small sample before full-scale application is recommended. Application Methods Mix by volume two parts Awlcraft 3000 Base with one part Awlcat #2 (G3010) Spray Converter to a smooth, homogenous mixture. Reducer addition level required to achieve 11-15 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn 2) varies color to color. For standard air atomized application this can be attained by adding up to 33% reducer, using the correct spray reducer appropriate for conditions. Clear coats and painting in high temperature conditions may require additional reduction. Awlgrip, the AkzoNobel logo an d other products mentioned in this p ublication aretrademarks of AkzoNobel. ©AkzoN obel 2024

Application Methods Recommended Thinning Spraying Viscosity Product Data Sheet Mix by volume two parts Awlcraft 3000 Base with one part Awlcat #2 (G3010) Spray Converter to a smooth, homogenous mixture. Reducer addition level Awlcraft 3000 required to achieve 11-15 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn 2) varies color to color. For standard air atomized application this can be attained by adding up to 33% reducer, using the correct spray reducer appropriate for conditions. Clear coats and painting in high temperature conditions may require additional reduction. For...