A4032 - 2 Pages

Add to MyNauticExpo favorites
A4032

Catalog excerpts

A40320183 COMPASS PICKUP FEATURES • IP68 • NMEA-0183 • 8-30V Supply • Manual calibration with PC software • Zero rotate ring • Centre Hole APPLICATIONS • Marine Compass Pickup • Rudder Angle • Trim-tab angle • Shaft-angle Encoder This sub-system senses the angle of a strong external magnetic field. Such a field is produced by large marine permanent-magnet compasses. By placing the A4032 under the compass the angle of the magnet is sensed and available as an NMEA-0183 sentence. A variety of options can be set. Calibration is assisted by a PC software utility. ORDER INFORMATION Calibration The calibration software cannot be obtained via our website but it can be requested by email: in-fo@autonnic.com

 Open the catalog to page 1

ELECTRICAL CHARACTERISTICS AT 20°C PARAMETER Supply Voltage Current consumption The output from the compass is a standard NMEA-0183 sentence which can be configured to be in one of several standard forms: Eg: $HCHDG,hhh.h,,,,*ss or $HCHDT,hhh.h,T where hhh.h represents the magnetic heading with one decimal place of precision, i.e: 000.0 to 359.9 degrees. The two HEX digits, ss, are a checksum. Serial output is RS422, 4800 Baud, 8 data bits, 1 stop bit, no parity. Other commands are listed in the Manual to set damping, output interval, calibration and a rich set of other options. CONNECTIONS...

 Open the catalog to page 2

All Autonnic Research catalogs and brochures

  1. AR45

    3 Pages

  2. AR35

    3 Pages

  3. A408x

    3 Pages

  4. A405x

    2 Pages

  5. A407x

    2 Pages

  6. A5022

    2 Pages

  7. A5040

    2 Pages

  8. A5050

    2 Pages

  9. A5905

    2 Pages