- Catalogs
- Autonnic Research
- 0183 WIND SENSOR
0183 WIND SENSOR
0183 WIND SENSOR
- Wind Speed Error (ERRWS): 3-5% for 10-40 knots.
- Wind Direction Error (ERRDIR): 4-8 degrees at 20 knots.
- Direction Settling Time (tDSET): 1.3 seconds with minimum filtering.
- Speed Settling Time (tWSSET): 2 seconds with minimum filtering.
- Minimum Wind Velocity (WVmin): 1.7 knots.
- A5120E (Extended): 290g
- A5120N (Standard): 275g
- A5120P (Power): 252g
- Cables: A5901 (7.5m) - 190g, A5902 (20m) - 500g
- Robust construction with UV-resistant materials.
- Sealed to IP68 standards.
- Magnetic sensing for direction and speed.
- Compatible with NMEA-0183 protocol.
- Available in three arm lengths for different applications.
- Supply Voltage (VCC): 8-18 Vdc.
- Current Consumption (ICC): 25 mA without NMEA loads.
- Number of Output Loads: Supports up to 4 NMEA loads.
- Storage Temperature Range (θstor): -40 to +100°C.
- Operating Temperature Range (θop): -25 to +50°C.
- Maximum Wind Speed (SMAX): 80 knots.
- Includes connections for power, NMEA input/output, and ground.
- Supplied with a 1m cable and Binder pin connector.
- Output sentences provide wind speed and direction data.
- Input sentences allow configuration of reference direction, damping, and output rate.
- Base fixing centers with 5mm diameter holes.
- Dimensions vary by model: A5120E (540mm x 300mm), A5120N (390mm x 225mm), A5120P (330mm x 60mm).
Catalog excerpts
The NMEA 0183 version of Autonnic’s Wind Sensor provides wind-speed and direction data in several standard formats. It is ideal as a direct replacement for existing installations or to enhance a system. It is available in 3 arm lengths for Power, Normal and the Extended is mainly for racing. Robustly made UV-resistant materials Sealed to IP68 Magnetic sense of Direction Magnetic sense of Speed NMEA-0183 Available in 3 different lengths PERFORMANCE PARAMETER Direction Settling Time Minimum filtering Speed Settling Time Minimum filtering Minimum Wind Velocity ORDER INFORMATION Weight
Open the catalog to page 1
ELECTRICAL CHARACTERISTICS AT 20°C PARAMETER Supply Voltage Current consumption Number of Output Loads NMEA loads NMEA OUT+ PWR+ NMEA IN+ NMEA INNMEA OUT GND ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temp Range Operating Temp Range Supply Voltage Wind Speed
Open the catalog to page 2
Base fixing centres. Holes are 5mm dia Dimensions mm The A5120E, N and P are supplied with 1m cable terminated in a Binder pin connector type 99 9113 03 05 with mating socket supplied NMEA COMMANDS Output sentences $WIMWV,a.a,R,s.s,N,A*hhhh where a.a = dir s.s= speed (kn) *hhhh is set by the configure command: x=0 omit; x=2 hhhh = ID $YXXDR,C,x.x,C,WND*hhhh x.x =˚C. This sentence not sent if y in configure command = 0; sent regularly if y=1 without *hhhh; if y=2 regularly with ID=hhhh $PATC,WIMWV,ACK acknowledgement that a command was received $PATC,WIMWV,RID,xxxxx ID = xxxxx Input sentences...
Open the catalog to page 3
