INTENSA MRM0115, MRM0320, MRM0620
16Pages

INTERIOR & EXTERIOR Operating Instructions

Technical Specifications

The INTENSA series of compact LED lights with electronic driver built-in waterproof anodized aluminium casing is designed by using 1, 3 or 6 high-power LEDs with built-in microprocessor which enables network connections and remote control with digital dimming. Advanced optical systems with reflector or high-efficiency lens and holographic diffuser allows perfect light spread with different color temperature options for The multi-color RGBW models offer the best illumination quality of different white lighting white and all other colors of lighting manually or automatically through the...

High-Grade Polycarbonate Glass Optical Window with Holographic Diffuser. Massive face shape made of aluminium or stainless steel. (3) Interior & exterior light casing Aluminium casing. Holding springs {2x) to fix the interior & exterior light on the flat surface. The 2-pole or 3-pole multi-core cable to connect the 12-24Vdc power supply and control.

The interior & exterior light kit consists of the following components: • Interior & Exterior Light INTENSA series • Operating Instructions with Declaration of Conformity and Warranty conditions The INTENSA has to be installed on a flat surface of the vessel's ceiling or wall. The installation has to be realized by a qualified personnel. Surface preparation The interior & exterior light is recommended to be installed on the location to allow the best illumination and lighting effects. The diameter of the hole drilled through the board to insert and to fix the interior & exterior light has...

The power supply has to be connected through the switch (not included) with correct polarity and protected by a fuse (not included). The power supply voltage range has to be from 10 - 30Vdc. The interior & exterior light has to be connected as described in the table below: BROWN BLACK The interior & exterior light has to be connected as described in the table below: The control of the unit has to be connected through the key-switch (not included) to the GND by using a 2-pole signal cable extension, (not included) When two or more interior & exterior lights are connected the control wires...

INTERNAL DIMMING Single-color models MRM0115 and MRM0320 with internai (I) dimming control: The dimming of interior & exterior light can be controlled by using the on/off switch, (not included) Press (he switch to on position. Press the switch to off position. Follow the procedure to set the dimmer: (2) Turn the light off-on quick and wait until light lights at full power (3) Turn the light off-on quick and wait until light lights at full power (4) Turn the light off-on quick and wait until light lights at desired power (5) Turn the light off when the light lights at desired power (7) Turn...

Multi-color model MSR0620 with external (E) control: The multi-color RGBW interior & exterior light can be controlled by using the additional key switch. When the light is turned-off the color or mode of lighting can be changed sequentially by pressing the momentary switch for 2 seconds: Custom Color _Cool White_ White Color Spectrum Custom White Color Rainbow Color Spectrum Press the key-switch momentary. Changing the color or mode of lighting When the light is turned-off press the key-switch for 2 seconds. Setting the Custom White Color At the selected White Color Spectrum mode press the...

TECHNICAL SPECIFICATIONS Power supply Reflector angle Optical window Luminous flux White color temperature Mounting hole Power supply Lens angle Optical window Luminous flux White color temperature Mounting hole Power supply Reflector angle Optical window Luminous flux White color temperature Mounting hole High-grade polycarbonate glass Black anodized aluminium Aluminium front shape 145g (C) or 125g (M) Stainless steel front shape 225g (C) or 160g (M) High-grade polycarbonate glass Black anodized aluminium Aluminium front shape 175g (C) or 155g (M) Stainless steel front shape 235g (C) or...

1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement of...

Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in Manufacturer's Address: declares that Ihe products Item. Product Name and Model Number: 1. Interior & Exterior light INTENSA series conform to the following Product Specifications: Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE- marking accordingly:

ASTEL d.o.o., Dutovlje 138, 6221 Dutovlje, Slovenia E-mail: info@astel-marine.com