video corpo

CONVEX MSR0680
12Pages

{{requestButtons}}

Catalog excerpts

CONVEX MSR0680 - 1

Operating Instructions

Open the catalog to page 1
CONVEX MSR0680 - 3

The CONVEX series underwater lights are designed to use the latest LED lighting The surface-mount designed casings enable very simple installation on the hull without making any bigger holes through the hull under water line. All the models are available in aluminium bronze and anodized aluminium casings in different colors. The lighting are available in white, blue and green colors. All the models are designed with 6 power LEDs and suitable power supply units. • Aluminium Bronze or Anodized Aluminium • 6 Power LEDs Design • White, Blue or Green Lighting • Tempered Glass Optical Window •...

Open the catalog to page 3
CONVEX MSR0680 - 4

Underwater Light CONVEX MSR0680 The 6 mm depth tempered glass optical window. (2) Underwater light casing Aluminium bronze or anodized aluminium casing with fixing holes and cable gland. The 4-pole multi-core cable to connect the power supply unit. The fixing screws to fix the underwater light on the hull.

Open the catalog to page 4
CONVEX MSR0680 - 5

Power Supply Unit MPS02800 Terminal-block connector to connect the LED underwater light using 4-pole multi-core cable. Terminal-block connector to connect optional remote control unit or switch. Terminal-block connector to connect 12-24Vdc power supply. Terminal-block connector to connect to the DC IN connector of another power supply unit.

Open the catalog to page 5
CONVEX MSR0680 - 6

The underwater light kit consists of the following components: • Underwater Light CONVEX MSR0680 • Power Supply Unit MPS02800 • 3 X fixing screw M6x80 with nut M6 and washer • Operating Instructions with Declaration of Conformity and Warranty conditions Underwater Light CONVEX MSR0630 The CONVEX MSR0680 has to be installed on a flat surface on the stern of the hull of the vessel. Do not try to install the underwater light while the vessel is in the water. When the installation is finished briefly test the underwater light prior to launching the vessel. The installation have to be realized...

Open the catalog to page 6
CONVEX MSR0680 - 7

♦ Ail the stainless steel fixing screws (M6x80) it is highly recommended to be sealed in the contact with underwater light casing by optional TEF-GEL™ waterproof paste (not included) to prevent galvanic corrosion. • To install the underwater light on the steel hull it is highly recommended to use the optional isolation board (not included) between the hull and underwater light casing to prevent galvanic corrosion. • Do not overtighten the screws as this can result in hull or underwater light damage. The underwater light has to be connected to the vessels bonding and cathodic protection...

Open the catalog to page 7
CONVEX MSR0680 - 8

• The main DC power supply of the vessel has to be switched off before installation. Power supply connection The power supply has to be connected through the switch (not included) and protected by a fuse (not included) to the DC IN terminal-block connector with correct polarity. The power supply voltage has to A power supply unit of another underwater light can be connected to the DC OUT terminal-block • Only one additional power supply unit of the same model number can be connected to the DC OUT terminal-block connector and suitable power supply cable should be used. The appurtenant cap...

Open the catalog to page 8
CONVEX MSR0680 - 9

TECHNICAL SPECIFICATIONS LED Underwater Light CONVEX MSR06S0 Power requirement Lens angle Optical window Luminous flux White color temperature Operating temperature Power Supply Unit MP302800 Input voltage Operating temperature 6 mm depth tempered glass Aluminium bronze (AB2) or anodized aluminium Design and specifications subject to change without notice.

Open the catalog to page 9
CONVEX MSR0680 - 10

1.The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferrable and covers the product for the specified time period. 4. In case any part od the equipment proves to be detective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement of...

Open the catalog to page 10
CONVEX MSR0680 - 11

Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in Manufacturer's Address: Dutovlje 138 declares that the products item. Product Name and Model Number: 1. Underwater Light CONVEX MSR0680 with Power Supply Unit MPS02800 conform to the lollowing Product Speciiications: Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE- marking accordingly:

Open the catalog to page 11
CONVEX MSR0680 - 12

ASTEL d.o.o., Du to vi je 138, 6221 Dutovlje. Slovenia

Open the catalog to page 12

All ASTEL MARINE catalogs and brochures

  1. CONUS MSR0680

    12 Pages

  2. CONUS MST18240

    12 Pages

  3. ARCUS MRM01

    12 Pages

  4. CONUS MSR18240

    12 Pages

  5. PLAQUE MFM0680

    12 Pages

  6. CONVEX MST0680

    12 Pages

  7. CONUS MST0680

    12 Pages

Archived catalogs

  1. Brochure 2013

    21 Pages

  2. CONVEX MTH0680

    12 Pages