Group: ASTEL d.o.o.
Catalog excerpts
INTERIOR & EXTERIOR Operating Instructions
Open the catalog to page 1The ARCUS MSR01 series of very innovative multi-color RGB LED interior & exterior light is built-in waterproof stainless steel casing with different front shapes and lighting angles. It is suitable for using as interior and exterior downlight and step or staircase light. The most advanced electronic design with built-in microprocessor enables network connection and simple control of complete group of the The ARCUS MSR01 series is designed to light to the floor under the angle of 45 degrees or straight. The main feature is that ARCUS MSR01 series allows changing of the color of lighting...
Open the catalog to page 3High-Grade Polycarbonate Glass Optical Window. (2) Interior & exterior light casing Stainless steel casing with fixing holes for surface-mount models or basic mounting plate for rail- mount model. Different stainless steel face shapes. Red, black and green wires to connect the 12-24Vdc power supply and control. Two fixing screws to fix the interior S exterior light on the flat surface or to fix the basic mounting plate to the rail for rail-mount model.
Open the catalog to page 4The interior & exterior light kit consists of the following components: • Interior & Exterior Light ARCUS MSR01 • 2 X fixing screw 2.9x13 or M4x8 for rail-mount model • Operating Instructions with Declaration of Conformity and Warranty conditions The ARCUS MSR01 has to be installed on a flat surface of the vessel's staircase, ceiling or floor or on the vessel's rail with diameter of 30mm. The installation has to be realized by a qualified personnel. Surface preparation The interior & exterior light is recommended to be installed on the location to allow the best illumination and lighting...
Open the catalog to page 5Before inserting the interior & exterior light into the hole of the board the sealant has to be used around the fixing holes and around the casing on the rear surface of the interior & exterior light. Before fixing the basic mounting holder to the rail the sealant has to be used around all the three holes and on the rear surface of the basic mounting holder. The sealant can be on silicon basis but the best solution is two-component polymer sealant. The interior & exterior light has to be inserted through the hole from outside of the board and fixed with two screws 2.9x8. After cleaning the...
Open the catalog to page 6The control of the unit has to be connected through the key-switch (not included) to the +DC by using a 2-pole signal cable extension (not included) to tum-on and turn-off the interior & exterior light and to select the color and mode of lighting. When two or more interior & exterior lights are connected in a network all the control wires (green) can be connected in parallel and controlled by using only one key-switch. * The max. 20 units can be connected in one network group and controlled by using one key-switch. If the number of units exceeds 20 units an optional transceiver has to be...
Open the catalog to page 7TECHNICAL SPECIFICATIONS Power supply Lens angle Optical window Luminous flux Lighting color Operating temperature 60° (angular lighting) or 90° (straight lighting) High-grade polycarbonate glass <t>40 mm X 26mm (slope front shape) <t>50 mm X 26mm (gentle front shape) 75g (slope front shape) 95g (gentle front shape) Design and specifications subject to change without notice.
Open the catalog to page 81. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement of...
Open the catalog to page 9Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in Manufacturer's Address: declares that Ihe products Item. Product Name and Model Number: 1. Interior & Exterior light ARCUS MSR01 conform to the following Product Specifications: Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE- marking accordingly:
Open the catalog to page 10ASTEL d.o.o., Dutovlje 138, 6221 Dutovlje, Slovenia E-mail: info@astel-marine.com
Open the catalog to page 12All ASTEL MARINE catalogs and brochures
-
Astel USA Brochure
2 Pages
-
Nautical Equipment 2024
37 Pages
-
EQUATOR_MSR36240manualENG_v2
12 Pages
-
EQUATOR_MSR1280manualENG_v2
12 Pages
-
EQUATOR_MSR0640manualENG_v2
12 Pages
-
CONVEX MSR0680
12 Pages
-
CONUS MSR0680
12 Pages
-
CONUS MST18240
12 Pages
-
ASTRA MSM0115, MSM0320, MSM0650
12 Pages
-
CONUS MSR18240
12 Pages
-
CONVEX MST18240
12 Pages
-
CONVEX MSR18240
12 Pages
-
PLAQUE MFM18240
12 Pages
-
PLAQUE MFM0680
12 Pages
-
CONVEX MST0680
12 Pages
-
CONUS MST0680
12 Pages
-
WIRELESS YACHT CONTROL SYSTEMS
24 Pages
Archived catalogs
-
Nautical Equipment 2023
48 Pages
-
ASTEL MARINE 2020
52 Pages
-
Astel Marine 2017
48 Pages
-
Nautical Equipment 2014
21 Pages
-
Brochure 2013
21 Pages
-
Brochure 2012
8 Pages
-
EQUATOR MSR36240
12 Pages
-
EQUATOR MSR1280
12 Pages
-
CONVEX MTH0680
12 Pages
-
CONVEX MTH18240
12 Pages
-
Brochure 2011
2 Pages
-
BROCHURE 2010
2 Pages
-
EQUATOR MSR0640
12 Pages