MAGNETIC LEVEL GAUGE AI.LMV-16 Series

OPERETING PRINCIPLE Magnetic level gauges work on the principle of communicating vessels, therefore the level in the measuring chamber will be the same as the level in the vessel. The measuring chamber is fitted with a float, which has a magnet inside. The float with magnet will float on the medium and the magnet in the float will turn the flaps of the indicating rail. The float in the measuring tube is standard not pressurized and has no magnetic or mechanical guidance. This construction makes the float less dangerous than a float which is standard pressurized. When necessary ASIT ITALIA can...

MODELS In order to meet all the requirements there are several standard models available. AI.LMV-16.D With two or more process connections for mounting on the side of a vessel. This design is suitable for many different applications, for example condensate tanks, LPG tanks etc. AI.LMV-16.L With one process connection for mounting on the side of a vessel. This model is often used for day tanks for ships. AI.LMV-16.F With one process connection on the bottom, this type is suitable for mounting above a tank. This design is mostly used for storage tank below the surface. AI.LMV-16.M With two or more...

• Standard unpressurised floatsystem • Float without mechanical or magnetic guide rails • Fully corrosion resistant system • Competitive prices • Short delivery times • Measurement is unaffected by pressure, vacuum, temperature, foam and viscosity • Minimum sensitivity to density variations • Permanent indication without external power supply • Low temperature version is fitted with ice free indication strip • Unique free view indication rail in plastic, Aluminium or full SS 316 • Fully adjustable switches • Scale / ruler available in cm, mm, % or litres • Back lighting is unnecessary • Eccentric...

Indication rail: Polycarbonate (max. temp. 105 °C, temporary 120 °C) Aluminium with SS316 flaps Stainless steel 316 Weld or thread (Male / Female) V/'-V B = 70 mm DN 40-DN 50 and ANSI 1.1/2"-2"on 1"pipe B = 130 mm Drain: V, V" or %" plug BSP or NPT V, V" or %" ballvalve None Drain gasket: EPDM, NBR, FPM Vent: V, V" or %" plug or valve, BSP or NPT G 2" stop None Float: From density min. 380 kg/m3 Drain length: Density min. 920 kg/m3 A = 200 mm (*) Extra support: C. to C. > 3 meter for offshore C. to C. > 4 meter for onshore Pointers: High & Low in stainless steel Marking: Tag plate acc. to standard...

2. AI.LMV-16.F (mounting on top of a vessel) 2.1 Without stillingwell Model: F-00A / F-00B Material: Stainless steel 316L (1.4404), others on request Pipe: 60.3 x 2 mm (above tank) Stilling well: Without Pressure: Max. 60 bar (depending on type) Temperature: Max. 350 °C Measuring lenght: Max. 5500 mm Indication rail: Polycarbonate (max. temp. 105 °C, temporary 120 °C) Aluminium with SS316 flaps Stainless steel 316 Process connection: DIN DN 50-DN 150 / PN 40 ANSI 2” – 6” 150# RF ANSI 2” – 6” 300# RF ANSI 2” – 6” 600# RF Vent: ½”, ¾” plug BSP or NPT, flange or valve Float F-00A: Float OD 52 mm...

2.2 With stilling well pipe Model: F-01 / F-01A Material: Stainless steel 316L (1.4404), others on request Pipe: 60.3 x 2 mm (above tank) Stilling well: pipe 54 or 60.3 Pressure: Max. 60 bar (depending on type) Temperature: Max. 350 °C Measuring lenght: Max. 5500 mm Indication rail: Polycarbonate (max. temp. 105 °C, temporary 120 °C) Aluminium with SS316 flaps Stainless steel 316 Process connection: DIN DN 50-DN 150 / PN 40 ANSI 2” – 6” 150# RF ANSI 2” – 6” 300# RF ANSI 2” – 6” 600# RF Vent: ½”, ¾” plug BSP or NPT, flange or valve Float F-01: Stilling well pipe OD 60.3, float OD 52 From density...

Material: Stainless steel 316L (1.4404), others on request Pipe: 60.3 x 2 mm (above tank) Stilling well: 3- rods 0 76 or 0 104 Pressure: Max. 60 bar (depending on type) Temperature: Max. 350 °C Measuring lenght: Max. 5500 mm Indication rail: Polycarbonate (max. temp. 105 °C, tempo Aluminium with SS316 flaps Stainless steel 316 Vent: W, 3A" plug BSP or NPT, flange or valve Float F-02: 3- rods 0 76, float OD 52 mm From density min. 480 kg/m3 Density depending on measuring length, by measuring length 1000 mm for std. floats: Density min. 1160 kg/m3 A = 150 mm Float F-04: 3- rods 0 104, float OD...

2.4 With stilling well pipe Model: F-03A / F-03B Material: Stainless steel 316L (1.4404), others on request Pipe: 60.3 x 2 mm (above tank) Stilling well: Pipe 76.1 or 88.9 Pressure: Max. 20 bar (depending on type) Temperature: Max. 350 °C Measuring lenght: Max. 5500 mm Indication rail: Polycarbonate (max. temp. 105 °C, temporary 120 °C) Aluminium with SS316 flaps Stainless steel 316 Process connection: DIN DN 80-DN 150 / PN 40 ANSI 2” – 6” 150# RF ANSI 2” – 6” 300# RF ANSI 2” – 6” 600# RF Vent: ½”, ¾” plug BSP or NPT, flange or valve Float F-03A: Pipe 76.1, float OD 67 mm From density min. 470...

3. AI.LMV-16.R (mounting between two pipes) Model: R-40 / R-150 / R-300 Material: Stainless steel 316L (1.4404) Pipe: 60.3 x 2 mm or 60.3 x 2.77 mm Pressure: Max. 40 bar / 150 or 300 lbs Temperature: Max. 400 °C Measuring lenght: Max. 5500 mm in 1 piece, longer out more pieces Indication rail: Polycarbonate (max. temp. 105 °C, temporary 120 °C) Aluminium with SS316 flaps Stainless steel 316 Process connection: DIN DN 80-DN 150 / PN 40 ANSI ½” – 2” 150 - 300# RF Thread (Male / Female) ½” – 1” BSP or NPT Float: From density min. 380 kg/m3 Extra support: C. to C. > 3 meter for offshore C. to C....

All the magnetic level gauges are fitted with a float. This float is standard in stainless steel, but the float is also available in Titanium, Hastelloy, PVC-C, PVC-U, PP, PVDF, PE etc. The float must have enough buoyancy and the magnet must be fitted at the right position inside the float. So it is always important to select a float which is suitable for the process conditions. In order to select the correct float the following process conditions are necessary. - Working pressure - Operating temperature The lowest density, for which we can supply a float is 380 kg/m3 but this is depending on...