(B57) UNIVERSAL HYDRAULIC MOTORIZATION FOR FORESAIL FURLERS “RGFI” Together with the hydraulic foresail furlers complete with foils, Bamar presents a line of hydraulic motorizations to replace either furling drum or motorization on existing foresail furlers. USE OF THE EXISTING STAY: The motorization is supplied with a manual turnbuckle, thus allowing for the use of the existing stay. You just need to cut the stay to measure and then fit STA-LOK® threaded studs and terminals (please refer to pages 27 and 28) in order to connect the wire stay to the integrated turnbuckle. The system is also supplied with a spherical fork toggle that may be fitted directly onto the boat chain-plate. VERSATILITY: By means of an “ADAPTER”, the motorization may be fitted on all models of foresail furlers available on the market. You just need to take off either the manual drum or the existing motorization and replace it with the “RGFI” motorization. By keeping the original foils and halyard swivel you save money, as you do not need labour to take them off. MATERIALS: Most components are machined from aluminium type 6061-T6, protected by hardcote anodising, and some parts are made of stainless steel. In order to get the best mechanical resistance of materials, we use extruded aluminium to be machined with CNC machines. Aluminium has a high coefficient of resistance against UV rays. All plastic materials, ball bearings and bushes, are protected inside the mechanism, thus granting a long life in salty environments subject to high UV rays concentration. Option with stay tensioning cylinder BAMAR FACNOR FURLEX GOIOT HAASE HARKEN HOOD NEMO PLASTIMO PROFURL RECKMANN SCHAEFER Version without stay tensioning cylinder Sail tack and access to the integrated manual turnbuckle. FAILSAFE OPERATION: In the event of a total failure of the boat hydraulic system, the unit can be manually operated, by inserting a standard winch handle in the manual emergency clutch. HOW TO PLACE AN ORDER 1. Determine the model depending on stay diameter, type of foil fitted on the existing furler (please refer to product group B36), foresail area, boat length, and characteristics of the boat power-pack. 2. Choose the right stud and terminal for the connection to the stay (please refer to pages 27 and 28). B57 (1x19) stay ø mm ROD # Code