FRP centrifugal pumps for seawater | SATURNevo
6Pages

CENTRIFUGAL PUMPS FOR SEAWATER AND CORROSIVE FLUIDS ENTIRELY MADE OF FIBERGLASS CLOSE OR LONG COUPLED 50 Hz

FIBERGLASS CENTRIFUGAL PUMPS FOR SEAWATER AND CORROSIVE LIQUIDS The evolved SATURNevo range consists of horizontal centrifugal single-stage pumps compliant with ANSI/ASME B73.1 standards. The pump casing are made of FRP (fiberglass reinforced polyester) whih neither requires protective coatings or metallici armour. ARGAL’s SATURNevo series offers the durability and strength at par with metal alloy construction. Our SATURNevo range is offered in three configurations - ZGS - long coupled with bearing housing and coupling (offred with SS or FRP base frames), ZMS - close coupled and ZCS - a...

LONG-COUPLED “G” The coupling of the pump to the motor with a flexible joint delivers an extended operational life to the mechanical parts of the pump and therefore is the preferred solution for heavy duty application and continuous applications. The back pull-out construction allows for dismantling the support of the pump and some hydraulic parts subjected to periodic inspection without disconnecting the casing from the piping of the plant or removing the electric motor from the base plate. BACK PULL-OUT SYSTEM ZGS pumps with elastic coupling are equipped with the back pull-out system that...

TECHNICAL DATA CONSTRUCTION & CURVES

MECHANICAL SEALS SEAL FLUSHING Seals are usually flushed by the pumped liquid or by an external clean liquid if necessary. Single, double or cartridge models are available with different material constructions. Primary stamp Internal single Double flushed Crane 8-1T back to back Fixed materials° Rotating materials° carbon ceramic Back seal carbon ceramic Clean chemical liquids; hot/cold; concentrated/ diluted Acid mixtures Mixtures concentrated with fluorine. Strong and hot concentrated alkalies Liquids with gas formation abrasive liquids precipitation risk solutions Liquids with solids...

WHY CHOOSING A SATURNevo PUMP ? Summable into 4 significant details: • the volute casing is made of only one piece guaranteeing a total robustness, shock-resistance and regular thickness. • the blade shape of the impellers with augmented-energetical-efficiency three-dimensional development and less NPSH required. Blades are internally reinforced with carbon fiber. • a new external system for even better performance of the pump: it is now possible to adjust the impeller position closer to the volute casing by relocating the shaft only. • the feet and flanges are reinforced in kevlar...