aquawatt lithium batteries
8Pages

BOATENERGY BOOTSSTROM

LiFePO4 LiFeYPO4 Batteries are the safest lithium batteries on the market. aquawatt lithium batteries are made with advanced lithium iron phosphate cells. They are absolutely safe to operate, well established and proven. The weight is only 30% compared to conventional lead acid batteries with a much higher performance of 2.000 to 5.000 charging cycles. In average use, this results in a usability of 10-15 years.100 % of the energy capacity can be used instantly, compared to only 60% from conventional lead acid batteries. Considering the high number of cycles and the exceptional efficiency...

For aquawatt Green Power electric outboards and all other 48/50 Volt applications. Power packs in aluminium housing to be built in dry storage rooms. 50 V 160 Ah, for Green Power outboards 30 minutes at full power or 1 hour at 8 kW or 2 hours at 4 kW. Size A Length 700 mm, Beam 390 mm, Height 330 mm, Size B Length 1250 mm, Beam 200 mm, Height 330 mm, Other dimensions or capacities up to 600 Ah are available. 50 V 200 Ah , for 40 minutes at full power or 1 hours at 5 kW Size A Length 745 mm, Beam 560 mm, Height 320 mm, Size B Length 1130 mm, Beam 375 mm, Height 320 mm, Size C Length 1020 mm,...

For all aquawatt 96 / 100V inboard engines and all other 96 V applications. 100 V 200 Ah. Size A Length 1500 mm, Beam 515 mm, Height 320 mm, Also available 160 to 600 Ah in other measurements. Price according to current price list System and Isolation Monitoring for Green Flash Electric Outboard 144V 160 Ah for Green Flash outboard engine 25 minutes at full power or 1 hour at 23 kW or 2 hours at 12 kW or 4 hours at 6 kW or 8 hours at 3 kW. Size A Length 980 mm, Beam 740 mm, Height 330 mm, Weight 265 Kg, Energy 23 kWh Size B Length 1200 mm, Beam 580 mm, Height 330 mm, Weight 265 Kg, Energy...

Custom detailing We manufacture batteries to customers requirements in different sizes, voltages, capacities and different housings. One battery can be divided into 2 or 3 housings. Aluminium or glass reinforced plastic aquawatt lithium batteries are available in standard or tailor made aluminium or GRP housings. In special cases, especially for the use in inflatable boats, the charger can be integrated into the battery housing. Lithiumbatterien im GFK Gehäuse zur Verwendung in aquawatt Schlauchbooten mit GFK Boden. ( BRIG RIBs ) Batteries in aluminium housing have to built in dry storage...

Large capacity batteries For working boats, passengers ferries and stationary energy storage, we can deliver extra large capacity batteries. Chargers The chargers supplied by aquawatt are made by the leading European manufacturer and configured for aquawatt batteries. These chargers correspond to the battery management and are controlled by the BMS. The chargers are based on high-frequency technology. They are as small and light as possible and easily can be used in boats or cars. It`s possible to charge at all available power outlets on the way. Price in Euro ex works Length, Beam, High in...

For shore power 400 V 16 Ampere 3-phase 50/60 Hz Type Price in Euro ex works Length, Beam, High in mm Charging with wind energy To operate electric boats and vehicles in isolated areas with no grid electricity supply we can deliver special wind turbines for charging. Please note: this only makes sense if a big on-shore wind turbine is used. These wind turbines have a rotor diameter over 3m with a tower height of 6m or more.

Solar energy Solar energy can provide 100% autonomous electric propulsion for a vessel provided the solar array is of sufficient size. For on-board use with relatively small motors, the recommended size of the array should be 20m² or larger. For larger boats & motors, 80m² or more is recommended. Catamaran or Trimaran design is highly recommended for solar. We deliver all modules and components as well as complete solar boats. We also offer consultancy services for solar electric conversions. It is also possible to install a solar array on-shore to charge smaller boats. We deliver all...