Apreamare 64 Fly 1 ENGINES 2 * MAN V10 - 1100 power 1110 mhp / 809 kW at 2300 rpm 2 SPEED (knots) (ref cap. 6) knots knots maximum speed cruising speed 3 RANGE (nautical miles) maximum speed cruising speed 4 MAIN SIZES Loa = overall length (standard ISO 8666) Lh = Hull length (standard ISO 8666) Lg = waterline length (boat fully laden) Max. beam Depth under propeller (boat fully laden) Displacement unladen Displacement laden Max.number of persons on board navigation category CE 2003/44 certification modules 19,40 m. 19,36 m. 14,69 m. 5,60 m. 1,46 m. 29,5 ton./lb. 34,9 ton./lb. 16 B B + Aa (Sound Emission) 5 TECHNICAL DATA Hull type : 16° of deadrise . Warped hull with spray rails H = Overall height from keel H t = Minimum transport height from keel P = pulpit Standard fuel tank capacity Water tank capacity m. m. m. lt./US gals. lt./US gals. ton./lb. knot 6 PERFORMANCE SPECIFICATIONS the performance is estimated at the following conditions: standard version displacement of the yacht at full liquid load , clean hull , 25°c air temperature good weather conditions , 8 persons on board overloading the yacht by top speed decreases of Technical data, performance and range figures, designs and graphic reproductions contained herein have no certification value. They are purely descriptive and refer to standard models. Actual technical or descriptive specifications must be provided solely with regards to the craft being purchased. Therefore, any indications will be binding for the seller only if contained in the sales contract and in the relevant manual