1. Catalogs
  2. APREAMARE
  3. Apreamare 44

Apreamare 44

Apreamare 44

Product catalog summary
Engines
Two engine options are available: the CUMMINS QSC 8.3 - 6L with 550 mhp / 404 kW at 3000 rpm (optional) and the CUMMINS QSB 5.9 - 6L with 480 mhp / 353 kW at 3400 rpm (standard).
Speed
The maximum speed for the CUMMINS 480 is 30 knots, while for the CUMMINS 550 it is 32.5 knots. The cruising speeds are 27 knots and 29 knots, respectively.
Range
At maximum speed, the range is 235 nautical miles for the CUMMINS 480 and 220 nautical miles for the CUMMINS 550. At cruising speed, the range extends to 270 nautical miles and 255 nautical miles, respectively.
Main Sizes
The overall length (Loa) is 13.50 m (44 ft. 3 in.), hull length (Lh) is 13.44 m (44 ft. 1 in.), and waterline length (Lg) is 11.02 m (36 ft. 2 in.). The maximum beam is 4.53 m (14 ft. 10 in.), and the depth under propellers is 1.27 m (4 ft. 2 in.). The unladen displacement is 16.0 tons, and the laden displacement is 19.5 tons. The maximum number of persons on board is 12. The design category is CE 2003/44 B, with certification modules B + Aa (Sound Emission) R.I.Na.
Technical Data
The hull type features a transom deadrise of 15° with variable geometry and spray rails. The overall height from keel to GRP hard top is 4.86 m (15 ft. 11 in.), and the minimum transport height from keel is 4.15 m (13 ft. 8 in.). The pulpit measures 0.06 m (0 ft. 2 in.). Fuel tank capacity is 1650 liters (436 US gallons), and water tank capacity is 416 liters (110 US gallons).
Performance Specifications
Performance is estimated under specific conditions: a standard version displacement of 18.1 tons, at 1/3 load, with a clean hull, 25°C air temperature, 4 persons on board, and good weather conditions. Overloading by 0.7 tons decreases top speed by 1 knot.
Disclaimer
The technical data, performance, and range figures are descriptive and refer to standard models. Actual specifications must be confirmed in the sales contract and relevant manual.
See more

Catalog excerpts

Apreamare 44-1

Apreamare 44 1 ENGINES 2 * CUMMINS QSC 8.3 - 6L power 550 mhp / 404 kW at 3000 rpm 2 * CUMMINS QSB 5.9 - 6L power 480 mhp / 353 kW at 3400 rpm knots knots m. m. m. lt./US gals. lt./US gals. the performance is estimated at the following conditions : standard version displacement of the yacht : at 1/3 of load , clean hull , 25°C air temperature, 4 persons good weather conditions overloading the yacht by top speed decreases of ton./lb. knot maximum speed (at 1/3 loaded displacement) cruising speed 3 RANGE (nautical miles) maximum speed cruising speed 4 MAIN SIZES Loa = overall length (standard ISO 8666) Lh = Hull length (standard ISO 8666) Lg = waterline length (boat fully laden) Max. beam Depth under propellers (boat fully laden) Displacement unladen Displacement laden Max.number of persons on board Design category CE 2003/44 Certification modules 5 TECHNICAL DATA Hull type: Transom deadrise 15° Variable geometry with spray rails H = Overall height from keel to GRP hard top H t = Minimum transport height from keel P = pulpit Fuel tank capacity Water tanks capacity 6 PERFORMANCE SPECIFICATIONS Technical data, performance and range figures, designs and graphic reproductions contained herein have no certification value. They are purely descriptive and refer to standard models. Actual technical or descriptive specifications must be provided solely with regards to the craft being purchased. Therefore, any indications will be binding for the seller only if contained in the sales contract and in the relevant manual

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.