FlexLogic Slim
14Pages

FlexLogic Slim IP67 protected LED neon flex with a super-skinny illumination width of just 9mm Product Brochure

Invisible LEDs deliver superb clarity and brightness Create continuous lines of flexible light with the new FlexLogic LED range from Applelec. Suitable for internal and external applications, and with an IP67 protection rating, this encapsulated linear LED system ensures each LED is fully protected. FlexLogic Slim LEDs feature a maximum bend diameter of 90mm with light bent laterally along the length of the profile (as opposed to bending along the light surface). A flat profile ensures this product is ideal for recessed installations, where an ultra-thin line of light is achieved. FlexLogic...

Specification & Parameters Dimensions Technical Parameters Article No. Colour Working Voltage Min. Cutting Unit Min. Cutting Length Light Surface Continuous Length Storing Temp. Working Temp. Operating Temp. Note: Unless otherwise stated, the tolerance of the light is ±0.3mm Optical Parameters Photometric Data Article No. Beam Angle Candle power distribution Illuminance characteristics

Functions & Features Minimum Bend Diameter Light Surface The light can only be bent laterally (not along the light surface.) Light Surface Do not bend smaller than allowed minimum bend diameter. Types of Connector Injection-moulded Connectors (Factory fitted) Note: Unless otherwise stated, the tolerance of the light is ±0.5mm Injection-moulded Front Connector (bottom) Connects light to power supply with preinstalled bottom feed cable, IP67. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Injection-moulded Front Connector (side) Connects light to power supply with pre-installed...

Types of Connector Injection-moulded Connectors Continued Note: Unless otherwise stated, the tolerance of the light is ±0.5mm Injection-moulded End Cap Pre-installed termination protection of the light, IP67. Injection-moulded Jumper Connects two pieces of lights together with a flexible cable. IP67 Injection-moulded connector. L available in 0.3~1m. Maximum 8 Jumpers in 20m Maximum 4 Jumpers in 10m. Injection-moulded T-feed Connects two pieces of lights together with a T joint, energized from middle. IP67 Injectionmoulded connector. L1 and L2 available in 0.15~0.5m. L3 available in 0.3-3m....

Types of Connector Snap Connectors (DIY) Continued Note: Unless otherwise stated, the tolerance of the light is ±0.5mm Snap Front Connector (bottom) Connects light to power supply. IP67 DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Feed connector*1 (Two-pin) Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 Snap End Cap Termination protection of the light. IP67 DIY connector. Tail plug*1 Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 Snap Jumper Connects two pieces together with a flexible cable. IP67 DIY connector. L available...

Mounting Profile Locking Aluminium Profile Standard Length Note: Unless otherwise stated, the tolerance of the light is ±0.5mm Screw Hole Hole Number Note: Unless otherwise stated, the tolerance of the light is ±0.5mm Standard Length Screw Hole Hole Number

Mounting Profile continued Self-locking Aluminium Profile (Used with the clip) Standard Length Screw Hole Hole Number Note: Unless otherwise stated, the tolerance of the light is ±0.5mm

Appendix Third-Party Test Report Testing Item Testing Organisation Report Number Flame Retardant Note: The testing reports and certificates are available from the related official website.

Appendix Reliability Test of Light Testing Item Stabdard/reference value/description Photometric Testing Spectrum Analysis IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length) Photometric Distribution IES LM 79(lumen intensity distribution & Lux diagram) Lumen Maintenance & Life Time Normal Temperature Test Abnormal Operation Test Bending Test Swing Test Tensile Test Manufacturer-defined, > the weight of light in Twist Test Maximum connection length with both ends feed Manufacturer-defined, >200 cycles Ball Impact Swimming Pool Water Immersion Test Sea Water Immersion Test Salt Spray Test...

Appendix Figures of Typical Characteristics Working Temperature vs. Power Power(w) 5.5 5 4.5 4 3.5 3 2.5

Appendix (X,Y) Chromaticity Diagram Wavelength of Light Colour 520nm 530nm 540nm

Appendix Loading Chart Type Note: 1. These are the light maximum recommended running length subject to selected power supply. 2. For example: It is recommended to use one 80W power supply loading maximum 18m light (3.5w/m) or maximum 13m light (5w/m) by powering the light at one end. Correlated Colour Temperature ANSI Standard Nominal CCT Categories Nominal CCT -44.6 x (1/Tx) +0.00854 Remark: 1) TF is chosen to be at 100K steps(2300, 2400, ..., 6400K), excluding the ten nominal CCTs listed in Table 1. 2) ΔT=1.1900x108T3-1.5434x104xT2+0.7168xT-902.55 3) Same as in the Duv Tolerance r

For more information about our FlexLogic or any other Yacht products and lettering, please get in touch: +34 678 346 656 darren.thrower@applelecyacht.com www.applelecyacht.com Applelec Yacht creates and installs innovative yacht identity branding and is run by the award-winning UK signage manufacturing company, Applelec. Currently celebrating 15 successful years of trading, Applelec is known for the creation of highly sophisticated signage and has a wealth of experience creating superior signage and branding for yachts. Providing a discreet and efficient service, Applelec Yacht is managed...