Charger/Inverter 12V+24V
2Pages

MPB series Charger/Inverter is a smart power appliance integrated with the charging and inverting functions specially designed for marine applications. MPB Charger/Inverter has combined 2 functions into one, and that these two functions can be switched over from one to another in a smart manner based on practical environment at two different operating conditions. Under a charging mode, the MPB Charger/Inverter can supply power normally to backend electrical appliances while converting AC to DC for charging batteries though the 3-stage charging algorithm, thus allowing for the integrated smart management of battery charge and discharge On the other hand, the MPB Charger/Inverter under an inverter mode converts the DC power of batteries into pure sine wave AC power for supplying the power electricity required by the AC load devices in a yacht. The instant switchover between the two operation modes is performed in an uninterruptible manner so as to ensure the connecting computer, generator, lighting and other backend electrical devices can continue to function reliably. Product Features Charging Output Battery Voltage Bypass Output Bypass Rated Power Battery Input AC Output Distortion Factor Inversion Efficiency Protection Functions Parallel Mode Operating Temperature Storage Temperature Relative Humidity Protection Level (IP Rating) Display Type Communication Type Safety Standard Pure sine wave Support for parallel mode of connection LED display.LCD display can be achieved via CAN Communication(Support for NMEA 2000 protocoD Wall -mounti Offering a series of products for the users to select, and have complete functions with superior performance which are suitable to use for the boats and yachts of different Smart battery management system that is suitable for different battery types, and can prolong the service life as well as improve the utilization rate of the battery. Employ an advanced high-frequency inverting technology that allow for the supply of low distortion pure sine wave power output to electrical appliances. source to avoid the reset and restart of connecting electrical appliances. High instantaneous overload capacity allows the users to configure electrical appliances easily. Intuitive and user-friendly interface, simple to operate, and have an option for using LCD monitoring panel for performing touch-screen quick operations. Support for power capacity expansion through the N+1 parallel mode connection, and support for high power applications as well as power redundancy needs. Equipped with power supplementary function that can prioritize the power supply for electrical appliances in the event of inadequate capacity for AC power Support for NMEA 2000 communication protocol, and remote monitoring. Address:#7, Link Information Industry Park, Shuilianshan Road ,Nancheng,Dongguan, Guangdong, China E-mail: overseas@apmtech.cn Web: en.apmtech.cn

MPB series Charger/Inverter is a smart power appliance integrated with the charging and inverting functions specially designed for marine applications. MPB Charger/Inverter has combined 2 functions into one, and that these two functions can be switched over from one to another in a smart manner based on practical environment at two different operating conditions. Under a charging mode, the MPB Charger/Inverter can supply power normally to backend electrical appliances while converting AC to DC for charging batteries though the 3-stage charging algorithm, thus allowing for the integrated...