Digital communication protocol Modbus RTU Intrinsic safety certificates (ATEX, IECEx) Explosion proof certificates (ATEX, IECEx) M20x1,5F thread (cable gland not included) APLISENS S.A. Produkcja Prze Aparatury Pom PRZETWORNI Numer fabrycz Zakres pomiar Sygnał wyjścio Zasilanie G1/2 type G1/2", Æ4 hole M type M20×1.5, Æ4 hole 1/2’’NPT type 1/2’’NPT male + internal thread G1/4’’ GP type G1/2", Æ12 hole P type M20×1.5, Æ12 hole CG1 type G1" with flush diaphragm CG1/2 type G1/2" with flush diaphragm

Application The transmitters PCE-28.Modbus have two operating modes, configuration mode and Modbus mode. The configuration mode is used for changing settings and detailed diagnostics of the transmitter. In special version 4...20mA - the transmitter operates in a two-wire passive current loop system 4...20mA. The mode is activated after switching from Modbus mode to analog mode of operation It is required to connect the transmitter only with power wires. Digital output wires should be disconnected and protected. Installation The transmitter is not heavy, so it can be installed on the installation...

Ordering procedure Model Description Smart pressure transmitter II 1/2G Ex ia IIC T4/T5/T6 Ga/Gb IECEx * more than one option is available Nominal measuring range Electrical connection Process connections for SG el. connection Ex ia IIC T4/T5/T6 Ga/Gb Ex ia IIIC T110°C Db Ex ia I Ma II 2G Ex db IIC T6/T5/T4 Gb II 2D Ex tb IIIC T85°C/T100°C/T120°C Db for SGM and PZ2 Ex db IIC T6/T5/T4 Gb el. connection IECEx Ex tb IIIC T85°C/T100°C/T120°C D Marine certificate – DNV, BV For oxygen service (sensor filled with Fluorolube fluid), only G1/2” connection 4…20mA output signal (Exia not available) Range...