INDUSTRIAL PRESSURE GAUGE MS-100K ü Casing diameter Æ100 ü Material of casing, process connection and measuring element – stainless steel ü Accuracy 1% Application, construction MS-100 pressure gauges are applicable to the measurement of the pressure of liquids and gases at temperatures up to 200°C. The range of pressures of the measured medium should correspond to 3/4 of the reading range of the pressure meter for constant pressures or 2/3 of the reading range for pulsating pressures. The casing box is made of stainless steel and has a window made of industrial glass. The pressure gauge’s measuring element and process connection are made of stainless steel (or brass for version with diaphragm seals). Technical data Standard measurement ranges: 0...1, 1.6, 2.5, 4, 6, 10, 16, 25, 40, 60, 100, 160, 250, 400 bar -1...0, 0.6, 1.5, 5, 9, 15 bar Accuracy 1% Diameter of the casing Æ100 Material of the casing 0H18N9 (304ss) Material of process connection and measuring element H17N13M2T (316Ti), Process connection G1/2", M20×1.5 or 1/2”NPTM Process connection outlet bottom (special version: back) Operating temperature range Filling fluid: without glycerine Medium temperature range Filling fluid: without glycerine Degree of protection Special versions glycerine T casing filled with glycerine back connection Ordering procedure MS-100K /__÷__/___/___/___ Measurement range MC3.1 - Material certificate NACE - NACE MR-01-75 comply Type of process connection (G1/2", M20×1.5, 1/2"NPTM) Special version: glycerine, T Example: MS-100K pressure gauge / range 0 ÷ 6 bar / glycerine / G1/2" process connection