*mynauticexpo

APC-2000ALW

Product catalog summary

Overview: The document outlines the technical specifications and operational guidelines for the SMART PRESSURE TRANSMITTER APC-2000ALW, covering specifications, procedures, standards, and recommendations for installation and use.

Specifications: The APC-2000ALW is designed to measure pressure, underpressure, and absolute pressure of gases, vapors, and liquids. It features a piezoresistant silicon sensor, an aluminum alloy casing with IP66/IP67 protection, and a backlit display. It supports a 4-20 mA output signal with HART protocol and offers programmable range, zero shift, and damping ratio.

Metrological Parameters: The transmitter provides high accuracy of ±0.075% of the calibrated range, with special versions offering up to ±0.025%. It ensures long-term stability for up to 10 years and operates within a thermal compensation range of -25 to 80°C.

Electrical Parameters: The power supply ranges from 10 to 55 VDC, with a 4-20 mA output signal using HART protocol. A minimum load resistance of 240 ohms is required for communication.

Installation and Application: The transmitter can be installed with a universal mounting bracket and is suitable for various industries, including food and chemical. It can be equipped with diaphragm seals for special process connections, and electrical connections should use twisted cables.

Measuring Ranges: Nominal measuring ranges vary from 0-1000 bar to -7 to 7 mbar, with corresponding overpressure limits and rangeability.

Certifications and Safety: The transmitter is certified for intrinsic safety (ATEX, IECEx, FM, INMETRO, UKEX, KCS) and explosion proof. It holds marine certificates (DNV, BV) and complies with the Measuring Instruments Directive (MID) 2014/32/EU.

Materials and Operating Conditions: Wetted parts are made of 316L stainless steel or Hastelloy C 276, with a casing of aluminum or stainless steel. The operating temperature range is -40 to 85°C, with special considerations for medium temperatures exceeding 120°C.

Ordering Information: Detailed model code descriptions are provided for ordering, including casing options, output signals, process connections, and available accessories.

Additional Specifications: Ultra stable versions are available for certain ranges with specific process connections. Accuracy is ±0.05%, and marine certification is available. Suitable for oxygen service with Fluorolube fluid and specific connections. Extended thermal compensation range from -40°C to 80°C, protection class IP67, and NACE MR-01-75 certificate for specific connections. PED category I compliance and HART revision 7 protocol.

Ordering Procedure: Example provided for ordering a pressure transmitter with specific configurations.

Nominal Measuring Range: Various ranges from 0 to 1000 bar, with minimum set ranges specified.

Process Connections: Multiple thread options available with different materials, and pressure limits vary based on connection type.

Electrical Connection: Options include packing gland M20x1.5 and 1/2”NPT Female.

Accessories: Mounting brackets available in different materials, along with stainless steel plates and tag plates.

Display Configuration: Standard and safety versions available with options for backlight on/off. Custom configurations must be specified when ordering.

Catalog excerpts

SMART PRESSURE TRANSMITTER APC-2000ALW ü ü ü ü ü ü ü ü ü ü 4…20 mA output signal + HART 5 / HART 7 protocol (special version: 0…20 mA or 0…5 mA output signal + HART 5 protocol) Display with backlight Programmable range, zero shift, characteristic and damping ratio with local panel keys Safety version SIL2/SIL3 Intrinsic safety certificate ATEX, IECEx, FM (USA, Canada), INMETRO (Brazil), UKEX (UK), KCS (Korea) Explosion proof certificate ATEX, IECEx, FM (USA, Canada), INMETRO (Brazil), UKEX (UK), KCS (Korea) rs 5 yea up to rranty Marine certificate – DNV, BV wa Accuracy 0,075% (0,05%, 0,04% on request) Gold plated diaphragm (Au) MID (Measuring Instruments Directive) – certificate acc. to 2014/32/EU directive APC-2000ALW - Aluminum epoxy painted casing APC-2000ALW/SS - Stainless steel casing Rating plate Lock preventing the casing rotation GP type G1/2", Ć12 hole P type M20×1.5, Ć12 hole 1/2’’NPT M type 1/2’’NPT male + internal thread G1/4’’ G1/2 type G1/2", Ć4 hole M type M20×1.5, Ć4 hole M20×1.5 packing gland Ć5…10 cable or 1/2 NPT F 1/2’’NPT F type internal thread 1/2-14NPT GP type P type 1/2"NPT M type for HS version CG1 type G1" with flush diaphragm CG1/2 type G1/2" with flush diaphragm Version with direct

Open the catalog to page 1

Application and construction Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminium alloy cast or 316SS stainles steel, degree of protection IP66/IP67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0–340° relative to the sensor, and a choice of cable direction....

Open the catalog to page 2

Materials Wetted parts and diaphragms: Accuracy depending on the set range hardened glass Operating conditions Operating temperature range (ambient temp.) -40...85°C (Safety: -25...85°C) Exia, IS version Medium temperature range over 120°C – measurement with use an impulse line or diaphragm seal CAUTION: the medium must not be allowed to freeze in the impulse line or close to the process connection of the transmitter r0 – error for range 30...100% FSO r1 – error for range 10% FSO r1 = 2 × r0 Numerical error values are given in the technical data under metrological parameters SMART PRESSURE TRANSMITTER...

Open the catalog to page 3

Ordering procedure Model APC-2000 Description Smart pressure transmitter With display, output 4-20mA + Hart With display, output 4-20mA + Hart Functional Safety certificate according to PN-EN 61508:2010 parts 1 ÷ 7, PN-EN 61511-1:2017 + PN-EN 61511-1:2017/A1:2018-03, PN-EN 62061:2008 + PN-EN 62061:2008/A1:2013-06 + PN-EN 62061:2008/A2:2016-01 Stainless steel housing II 1/2G Ex ia IIC T4/T5 Ga/Gb IECEx Ex ia IIC T4/T5 Ga/Gb II 1/2G Ex ia IIC T4/T5 Ga/Gb II 1D Ex ia IIIC T115°C Da I M1 Ex ia I Ma (version with SS housing) Ex ia IIC T4/T5 Ga/Gb IECEx Ex ia IIIC T115°C Da Ex ia I Ma (version with...

Open the catalog to page 4

Nominal measuring range Description Range 0÷1000 bar (0÷100 MPa) 0÷600 bar (0÷60 MPa) 0÷300 bar (0÷30 MPa) 0÷160 bar (0÷16 MPa) 0÷70 bar (0÷7 MPa) -1÷70 bar (-0,1÷7 MPa) 0÷25 bar (0÷2,5 MPa) -1÷25 bar (-0,1÷2,5 MPa) 0÷7 bar (0÷700 kPa) -1÷7 bar (-100÷700 kPa) -1÷1,5 bar (-100÷150 kPa) 0÷2 bar (0÷200 kPa) 0÷1 bar (0÷100 kPa) -0,5÷0,5 bar (-50÷50k Pa) 0÷0,25 bar (0÷25 kPa) -100÷100 mbar (-10÷10 kPa) -15÷70 mbar (-1,5÷7 kPa) -25÷25 mbar (-2,5÷2,5 kPa) -7÷7 mbar (-0,7÷0,7 kPa) 0÷1,3 bar ABS (0÷130 kPa ABS) 0÷7 bar ABS (0÷700 kPa ABS) Min. set range 10 bar (1 MPa) 6 bar (600 kPa) 3 bar (300 kPa) 1,6...

Open the catalog to page 5

APC-2000ALW

APC-2000ALW

Catalog excerpts

All APLISENS S.A. catalogs and brochures