SMART PRESSURE TRANSMITTER APC-2000ALM with MODBUS RTU protocol ü ü ü ü Galvanic isolation of power supply and communication bus Accuracy 0.075% Aluminum or stainless steel housing with local display Explosion proof certificate ATEX and IECEx APC-2000ALM - Aluminum epoxy painted casing APC-2000ALM/SS - Stainless steel casing Rating plate Lock preventing the casing rotation 1/2’’NPT M type 1/2’’NPT male + internal thread G1/4’’ G1/2 type G1/2", Æ4 hole M type M20×1.5, Æ4 hole M20×1.5 packing gland Æ5…10 cable or 1/2 NPT F 1/2’’NPT F type internal thread 1/2-14NPT GP type G1/2", Æ12 hole P type M20×1.5, Æ12 hole GP type P type 1/2"NPT M type for HS version CG1 type G1" with flush diaphragm CG1/2 type G1/2" with flush diaphragm Version with direct or remote diaphragm

Application Pressure transmitter APC-2000ALM is designed to measure pressure, vacuum and absolute pressure of gases, vapors and liquids. The measuring element is a piezoresistive silicon sensor separated from the medium by an isolating diaphragm and manometer liquid. The electrical signal from the sensor is converted into a digital value compatible with the Modbus RTU protocol. The housing is made of high-pressure cast aluminum alloy or acid-resistant steel with IP66 protection. The transmitter is equipped with a configurable liquid crystal display. The housing design allows the display to be...

Ordering procedure Model APC-2000 Versions Certificates, options* * more than one option is available Nominal measuring range Description Smart pressure transmitter With display, Modbus output Stainless steel housing II 1/2G Ex ia/db IIC T5/T4 Ga/Gb II 2D Ex ia tb IIIC T100°C Db Packing gland available on I M2 Ex db ia I Mb (version with SS housing) request Ex ia/db IIC T5/T4 Ga/Gb IECEx Ex ia tb IIIC T100°C Db Ex db ia I Mb (version with SS housing) For oxygen service (sensor filled with Fluorolube fluid), only G1/2” connection Extended thermal compensation range -40 ÷ 80°C Protection class...