ELECTRIC WINCHES All Antal winches, from model XT40 to model XT70, maxi W80.3 ST and W90.3ST can be fitted with an electric motor. The models with a chromed drum are usually fitted with motors, as they are more suitable for heavy-duty applications but, on request, the aluminium drum can be “reinforced” by applying a special toothed crown gear of high resistance alloy or 316 s.steel. HORIZONTAL AND VERTICAL MOTORS All the winches may be equipped with a horizontal motor and gearbox with a worm screw. The largest models may be supplied with a vertical motor which uses a high-efficiency hypocycloid speed reducer. Both solutions have been studied to ensure particularly compact dimensions and maximum silent operation. MANUAL USE Simply insert the handle to disconnect the gearbox-motor unit. Greater safety: accidental starting of the motor does not affect the winch, avoiding dangerous turning of the handle. Greater efficiency: the gearbox-motor unit does not turn in manual use, avoiding needless friction. SPEED Electric winches maintain two speeds both in manual use (inverting the direction of rotation of the handle) and in electric use (pressing one of the two control buttons).

winch F1 screws: for fastening the winch to the flange F2 screws: for fastening the motor unit to the flange F3 screws: for fastening the flange to the deck motor unit-winch flange deck disengagement system gearbox motor unit It is of fundamental importance to be able to choose the most suitable speed for the manoeuvre that you want to perform; this allows fast recovery of the first part of the manoeuvre and more careful regulation in the final stage. In electric winches the speeds are higher than in manual use. The recovery speed, indicated in the tables, is measured without a load; in the presence...

SWITCHES Two switches with watertight protection must be installed for each winch. To identify the first and the second speed, 2 colours are used: grey and red. S.steel or plastic versions are available. S.steel cover, grey button S.steel cover, red button Plastic cover, grey button Plastic cover, red button CONTROL BOX Solenoids are contained in a water tight “control box”; they are available for both 12 and 24 Volt. BREAKER A breaker should be mounted to protect the motor against overload.