Catalogs >
Anschuetz >
Standard 30 MF

Standard 30 MF
1 / 4Pages

Catalog excerpts

Maintenance-free gyro compass Standard 30 MF is a maintenance-free gyro compass and attitude reference system based on Hemispherical Resonator Gyros for superior reliability and accuracy over lifetime. High accuracy and reliability Standard 30 MF uses superior hemispherical resonator gyro technology, known in the maritime market for more than 10 years. • Ultra-robust design, high accuracy over lifetime without drift • Settling time of only one hour, settles at rough sea states • Provides heading output even if speed and latitude input fails - a significant advantage over other compass...

Open the catalog to page 2

Standard 30 MF uses Hemispherical Resonator Gyros (HRGs) as angular rate sensors. HRGs are vibrating resonator gyros consisting of only a few elementary pieces: a single resonator and electronics for resonator control and vibration sensing, assembled in a miniature hemisphere and decoupled from the outside equipment. This simple design makes the gyro extremely reliable with no wear and tear and no need for maintenance. [51^V3[51 Visit our website for Standard 30 MF gyro compass and learn more about how we can offer you the perfect technical solution. Standard 30 MF can be used standalone...

Open the catalog to page 3

indicated rate-of-turn Type of enclosure acc. to IEC/EN 60529 • Operator unit IP 23/IP 56 front sided Supply voltage & power consumption General data Permissible ambient temperature • Permissible roll and pitch angle for full accuracy ±60° Data interfaces • 4x RS422 serial outputs (NMEA or Anschutz Course Bus) • Analog +/- 10 V output for rate-of-turn • 2x RS422 serial inputs (for speed and latitude) • 2x RS422 serial inputs (for other heading sensors, option) • 12x RS422 serial outputs (NMEA or Anschutz Course Bus) • System failure with potential-free relay contact • ALR/ACK NMEA alert...

Open the catalog to page 4