*mynauticexpo

Catalogs
Anschuetz
Nav Data Repeater

Nav Data Repeater

Product catalog summary

Overview: The Nav Data Repeater by Raytheon Anschütz GmbH is a multifunctional display and converter unit designed for marine navigation. It displays data such as heading, set heading, speed, and rate-of-turn, and can convert older signal formats into modern NMEA telegrams.

Specifications:

Reading Accuracy: 0.1°
Supply Voltage & Power Consumption: 24 V DC (15-36 V DC), max. 12 W
Serial Inputs: Supports RS232C/RS422, compatible with EN/IEC 61162-1 and NMEA 0183 versions 1.5-2.0
Analog Gyro Signals: Synchro transmission (360:1, 180:1, 90:1), Step transmission (180:1)
Serial Outputs: Heading ($HEHDT), Rate-of-turn ($TIROT)
Conversion Capabilities: Converts older GPS receiver telegrams to current NMEA formats
Alarms: Relay contact for de-synchronization and system failure
Environmental Conditions: Operating temperature -15°C to +55°C, Storage temperature -25°C to +75°C
Enclosure Type: IP23, compliant with EN/IEC 60529

Functionality: The device is essential for integrating new equipment like AIS, VDR, or autopilots into existing systems by converting synchro and step signals from old gyro compasses into serial NMEA telegrams. It also converts speed log data and older GPS receiver data into modern formats.

Installation Options: Available for desk or bulkhead mounting, providing flexibility in installation based on the vessel's requirements.

Compliance: The Nav Data Repeater adheres to standards such as EN/IEC 60945 and EN/IEC 61162-1, ensuring reliability and compatibility with marine navigation systems.

Catalog excerpts

Raytheon Anschutz Raytheon Anschutz

Open the catalog to page 1

NAV DATA REPEATER The Nav Data Repeater is a multi functional display and converter unit. Data for heading, set heading, speed and rate-of-turn is displayed. On the display a selection of the required data can easily be done with the arrow key. Heading changes are indicated by a bar graph. The ship’s rate-of-turn is displayed in real-time – a helpful indication. As a converter the Nav Data Repeater is often required, when new equipment as AIS, VDR or also new autopilots is installed in existing system environments. Synchro and step signals from old gyro compasses are converted into serial NMEA...

Open the catalog to page 2

All Anschuetz catalogs and brochures

Archived catalogs

SYNTACS Synapsis Tactical Command System
8 Pages