*mynauticexpo

Catalogs
Anschuetz
Course Printer / Course and Rudder Position Printer

Course Printer / Course and Rudder Position Printer

Product catalog summary

Overview: The document provides technical specifications and operational details for the Raytheon Anschütz Course Printer and the Course and Rudder Position Printer. These devices are used to record navigational data during voyages.

Course Printer: The course printer records the steered courses over a full 360° range on standard endless computer paper. Data is temporarily stored and printed every 4 minutes to avoid continuous operation. It can connect to the Standard 22 gyro compass distribution unit and records UTC time.

Course and Rudder Position Printer: This device, controlled by the NA05-U01 operator unit, records course, rudder angle, and clock time/date. It can also record the rudder position of a second rudder in twin rudder setups. Additional data such as position, speed, and autopilot parameters are displayed as status.

Technical Data:

Printer Type: 104 – 033 NG 001 for 230 V, 104 – 033 NG 002 for 115 V
Connection Voltage: 230 V ±10%, 50 Hz or 115 V ±10%, 50/60 Hz
Power Consumption: 20 W according to IEC 10561
Ambient Temperature: 0° C to 55° C
Printer Head: 24 needles with a resolution of 0.35°/pixel
Interface: RS 232C
Noise Level: 49 dB (A) according to ISO 7779
Weight: 9.5 kg

Operator Unit NA05-U01:

Connection Voltage: 24 V DC (18.6 V DC to 36.0 V DC)
Power Consumption: 0.1 A with 24 V
Input Interfaces for Rudder Angle: Analogue ±10 V DC, Digital RS 232/RS 422/RS 485
Output Interface: Digital RS 232 (to printer)
Alarm Contact: Potential free
Type of Enclosure: Desk mounting EN 60529 IP 56, With casing EN 60529 IP 44
Weight: Desk mounting approx. 1.5 kg, With casing approx. 3.5 kg

Installation and Connectivity: The course printer can be mounted with a bracket and connected to various navigation systems including gyro compass, NautoPilot, and GPS. The operator unit NA05-U01 is necessary for the course and rudder position printer and can be mounted on a bulkhead.

Catalog excerpts

Course Printer / Course and Rudder Position Printer-1

R Anschütz Course Printer / Course and Rudder Position Printer

Open the catalog to page 1

Course Printer / Course and Rudder Position Printer-2

R Anschütz Course Printer/ Course and Rudder Position Printer Course printer The Raytheon Anschütz course printer records the courses steered during the entire voyage. The course is recorded (full360°) on commercially avail ble a endlesscomputer paper, so that no special paper is required. The recorded data are stored temporarily and, in order to avoid continuous operation, printed out every 4 minutes. The course printer can be connected to the Standard 22 gyro compass distribution unit. Together with the course also UTC (time) will be recorded. Course and rudder position printer The operator...

Open the catalog to page 2

All Anschuetz catalogs and brochures

Archived catalogs

SYNTACS Synapsis Tactical Command System
8 Pages