C1000 E, 1 speed electric, 24VDC
1Pages

Andersen STAINLESS STEEL WINCHES C1000 E1 speed electric, 24VDC I Andersen Powered Capstan Winch: RA3010001400 C1000 E - E1 electric motor, 1 speed electric, 24VDC Maximum Working Load 1000kg (2200lb) * Extensions available to suit thicker decks. a Oy value includes allowance for push button cable and fitting on the motor housing. Motor can be rotated at 45° intervals which will change Ox and Oy values. Full installation dimensions can be found in the Product Manuals -available to download at www.andersenwinches.com. Motor units are supplied with installation manual, push button and cable terminals. Circuit breaker available separately. See motor unit product manual for push button to motor unit cable connection details. I Electrical Installation: must be added to this figure to determine the Ah requirement of the total battery bank capacity. A good rule of thumb is to use 3 x this total Ah figure as the minimum additional battery capacity for your battery bank. We recommend you contact a qualified marine electrician for advice. 5. This is the minimum recommended battery bank capacity to ensure minimum 10.5V is maintained in 12V systems, and 21V in 24V systems at start up current. Based upon battery CCA value at -18C and assuming fully charged batteries and no losses in wiring and connections. The motor will cut-out at pre-determined current and temperature limits. Wire length = length from battery to motor. Must be a 'slow blow' or 'long delay' type to allow for start-up current spike. Suitable circuit breakers available separately. The current "spike" generated at motor start-up, for a period of no more than 0.1 seconds. This is the minimum additional Ah (Ampere hours) battery capacity that will be required to run one winch. Assuming a single winch, used for of 15 minutes (0.25hr) per day at a load of 1/2 MWL = 63A. This equates to an Ah figure of 16Ah. The number of Ah for all other electrical equipment