PAN35, PAN45, BV, SH LEDS INDICATOR DISPLAY PANELS
12Pages

PAN35, PAN45, BV, SH LEDS INDICATOR DISPLAY PANELS y Each piece is tested one by one INDICATOR DISPLAY PANELS ULTRA COMPACTS WITH LEDS DIN 48X48 DIN 48X96 PAN45SH Possible options : - displaying under voltage presence (induction cables) - lighting up after undervoltage threshold - Contacts for remote information - Pushbuttons to control Possible supply from 8V to 500Vac/dc Realized by the company Kautz Starkstrom-Anlagen GmbH (Germany) Realized by the company Mayfield Industries (Australia)

Very economical, the new range PAN35/PAN45 is designed for cabinets with many repetitive outputs such as : Extractable cell distribution cabinets, Pump multipleoutputs, Circuit breakers... The PAN35/PAN45 series can be used in the most difficult situations. PAN35 / PAN45 DIN box 48x48mm Luminous Part only 3 or 4 indicators with or without options - displaying undervoltage - undervoltage threshold - output contacts THE DIFFERENT BOXES : Each product includes : - A luminous part fitted with of 3 or 4 indicators. This luminous part may be used alone (48x48 box) or combined with a control part...

Luminous Part with / without option +/ Choice of Luminous Part BV 3 or 4 indicators with or without options - displaying undervoltage - undervoltage threshold - output contacts Choice of Luminous Part 2 inverter push buttons Choice of Luminous Part 2 inverter push buttons + 1 switch Choice of Luminous Part 2 inverter push buttons + 1 RJ coupler GENERAL FEATURES TO ALL MODELS : The boxes are made of polyamide PA66 30gf loaded to 30% for a high mechanical strength over time. A gasket at the front ensures sealing (IP65). Rear fixing bracket Sealing joint This new bracket allows an easier fitting...

GENERALITIES : The luminous part can be used with both types of boxes : - DIN 48x48, one luminous part, with 3 or 4 LEDs with «LED test» input, with the optional output contacts. - DIN 48x96, containing the luminous part and an extension with a automatism part such as push-buttons, switches, coupler of connection. It consists of an assembly containing 3 or 4 (10x10mm) LEDs or 4 (5x5mm) LEDs and a large common label with a label holder. LEDs are cms tri-LEDs type. For each input, there is a switch that allows the user to choose a display color from 7 options. This component service life is...

- Closing the contact connected to the input lights up the corresponding LED. - Opening the contact connected to the input turns off the corresponding LED. - A «LEDs Test» terminal connected to an external push-button allows the lighting up of all the PAN35/PAN45 LEDs. | | if using AC: 50Hz to 60Hz only (can not be used with a frequency variator ex : variable speed In some countries, it is usual to meet Automatism voltage such as 110Vdc, 127Vdc or 200Vdc. The 05 version (from 15Vac/dc to 265Vac/300Vdc) is recommended for special contracts, such as those for Eastern Europe for...

Many types of switchgears have multiple departures (extractable drawer, circuit breakers, motor departures...) All these departures may require a local signaling of the 3 positions such as : «OPEN / CLOSED / ALARM» But it may become necessary to send information about the real position of the departure the controll room.. This requires one relay, which is costly in material ,in space and wiring. The new versions can include 1 or 2 relays with a dry contact 1 O/C (galvanic isolation) avoiding to wire an external relay. A selector allows to choose the information to send: (Open and/or Close...

However, an indicator light may be illuminated, even at low voltages, which may cause the operator to be misled. This can have serious consequences (presence of abnormal voltage not signaled, risk of manipulation for the operator). Example: the «48V presence» indicator is displayed, while the voltage is only 39V or caused by a voltage feedback in a coil, an unbalanced three-phase network or induction in the cables. This new model allows to display a voltage state or voltage presence only after an acceptable voltage threshold has been exceeded. It avoids unwanted signaling in the event of...

THE EXTENSIONS: CONTROL PART (CASE 48X96) i 48x96 box consist of a «luminous» part and a «control» part. They can use any of the luminous part models described previously. (See «LUMINOUS PART» for the special features and connections of each of them). As for the luminous part, all the components of the control part may receive labels that shall be inserted in a transparent pocket on the front side. The «control» part is entirely isolated from the luminous part. All connections are either «unpluggable terminal screwed», or «Faston plug, 4.8». (See § «LUMINOUS PART» for the special features...

«SH» EXTENSIONS WITH VERSION AA : «ALL in ONE», it combines all the controls of a power departure : - 3 or 4 indicator displays, - 2 impulse push-buttons of control, - 1 or 2 output contacts to send remote information (optional) - Control : The control part (on the right side) consists of 2 impulse inverter buttons. These buttons are used to control a contactor or can be used as «Leds Test» via an external wiring. - The connection is made directly on the unpluggable terminal screwed terminal blocs. A color code on connectors avoided wrong connections. These buttons are fitted with a...

«ALL in ONE», it combines all the controls of a power departure : - 3 or 4 indicator displays, - 1 switch for selection, - 2 impulse push-buttons of control, - 1 or 2 output contacts to send remote information (optional) Control : This is a SH model in version AA model with, an add-on, a selector switch. In addition to the uses of AA model, the switch can be used for the following functions : - make a test led with an impulse switch. - make a selection as "Manual/Automatic" with a selector switch. - Display this selection on a Led. - Inform the Control Room about the present selection with...