Boat Models and Specifications

The document provides detailed specifications for several boat models, primarily focusing on the Waterfowler 15 and MV 1546 AW series. Key parameters include:

• Length: 15 feet
• Bottom Width: 42" to 46"
• Beam/Side Height: 62" to 65" / 20"
• Transom Height: 15"
• Maximum Horsepower: 25 HP
• Approximate Weight: 210 to 340 lbs
• Capacity: 4 persons / 570 lbs
• Hull Gauge: .063" to .082"
• Hull Type: Modified-V, Modified-V tunnel, Flatbottom
• Number of Ribs: 8 to 11

These boats feature all-welded or riveted hulls, with options for consoles and side or center consoles.

Construction and Features

The hulls are constructed from aluminum alloys with strong, forged pistons for durability. The hull gauge varies by model, with thicker gauges for more robust designs. The hull types include Modified-V and Flatbottom, optimized for different water conditions.

Additional features include:

• No-feedback steering systems
• Rod holders (6 rods)
• Seats with backrest cushions and grab rails
• Fuel tanks and optional consoles
• Storage compartments for rods, dry storage, gun boxes with cushioned seats, livewells, coolers, and battery storage
• Spray-in floor liners (Line-X)
• Navigation and courtesy lights
• Power points and bilge pumps
• Optional camouflage paint colors (Khaki, Olive Drab Green)

Engine and Emission Standards

All Yamaha four-stroke engines used exceed the Federal EPA 2006 emission requirements. The F60, F75, and F90 models have earned a California C.A.R.B. three-star rating, indicating high environmental compliance.

Additional Equipment and Options

• Trolling motors and harnesses compatible with Minn Kota and Lowrance systems
• 12/24V receptacles with tilt-trim (TT) functionality
• Fishing seats or flip-flop seats at the console
• Coolers located below flip-flop seats
• Livewells positioned in center seats or compartments
• Seat pedestal bases and aluminum floors with sides
• Drop deck lights for navigation and courtesy

Summary of Critical Parameters and Best Practices

• Ensure engine horsepower does not exceed 25 HP for these models to maintain safety and performance.
• Use all-welded hulls for enhanced durability; riveted hulls are available for specific models.
• Storage and seating options should be selected based on intended use, with emphasis on rod storage and livewell capacity for fishing applications.
• Compliance with EPA and C.A.R.B. standards is critical for environmental regulations.
• Optional camouflage paint and accessories enhance usability in hunting and fishing environments.