*mynauticexpo

22HP

Product catalog summary

Overview: The document provides technical specifications and details for the 22HP series multi-turn potentiometers, including various models with different shaft diameters and bushing dimensions. It highlights the importance of selecting the correct model number based on these dimensions.

Model Specifications: The document lists several models, including 5-turn and 10-turn versions, each with specific shaft and bushing dimensions. It emphasizes the need to process the mounting hole on the panel to fit the potentiometer correctly.

Technical Specifications:

Resistance Range: 100Ω to 50kΩ for 5-turn models and 100Ω to 100kΩ for 10-turn models.
Total Resistance Tolerance: Standard Class ±3% (H), Precision Class ±1% (F).
Linearity Tolerance: Standard Class ±0.3% for 5-turn and ±0.25% for 10-turn; Precision Class ±0.2% for 5-turn and ±0.1% for 10-turn.
Power Rating: 1.0W for 5-turn and 2.0W for 10-turn models.
Electrical and Mechanical Travel: 360º Xn ±5º (n: No. of turns) with mechanical travel of 360º Xn +10º.
Insulation Resistance: Over 1,000MΩ at 500 V.D.C.
Dielectric Strength: 1 minute at 1,000 V.A.C.
Materials: Shaft made of stainless steel, housing case and bushing made of glass-filled nylon, terminals are gold-plated brass.
Mass: Approximately 20g for both 5-turn and 10-turn models.

Special Features: The document mentions special specifications available, such as multi-ganged versions, special shaft diameters, and slipping-clutch incorporated types.

Contact Information: Althen provides contact details for various regions, emphasizing their expertise in sensors and controls, along with services like calibration and custom sensor solutions.

Catalog excerpts

Model 22HPWirewound (Bushingmount) Low cost item ALTHEN SENSORS & CONTROLS Note: 1. 1pc. each inner teeth washer and hex nut are attached. 2. Outer dimensions of 5-turn version are same as those of 10-turn 3. Please process the mounting hole on the panel to be mounted with this potentiometer by the diameter of 10.32mm [Note: Please select the exact model number from the right-side table, because each model number has different shaft dia. and bushing dimensions.

Open the catalog to page 1

SENSORS & CONTROLS ■ General Specifications Standard Resistance Range: Total Resistance Tolerance: Independent Linearity Tolerance: Power Rating: Noise: Electrical Travel: Mechanical Travel: InsulationResistance: Dielectric Strength: Starting Torque: Stopper Strength: 1.0W (5-turn) 2.0W (10-turn) Within 100Q E.N.R. 360° Xn ±5° (n: No. of turns) 360° Xn +1 0°n: No. of turns) Over 1,000MQ at 500 V.D.C. 1 minute at 1,000 V.A.C. Within 10mN-m (100gf •cm) Approx. 0.35N-m (3.5kgOcm) Max. Torque exerted on fastening the mounting nut to the bushing: Max. Working Vdltage: Resist. Temperature Coefficient...

Open the catalog to page 2

22HP

22HP

Catalog excerpts

All Althen Controls catalogs and brochures