*mynauticexpo

12HP

Product catalog summary

Overview: The document provides technical specifications for the 12HP series multi-turn potentiometers, available in both bushingmount and servomount types. These potentiometers are designed for precision applications and come with various terminal options.

Types and Models:

Bushingmount Type: Available with lug terminals (12HP-5, 12HP-10) and pin terminals for PC boards (12HP-5P, 12HP-10P).
Servomount Type: Includes models 12HPS-5 and 12HPS-10, with options for pin terminals for PC boards.

Specifications:

Resistance Range: 100Ω to 50kΩ for 5-turn, 100Ω to 100kΩ for 10-turn.
Max Practical Resistance: 70kΩ for 5-turn, 150kΩ for 10-turn.
Total Resistance Tolerance: Standard Class ±3%, Precision Class ±1%.
Independent Linearity Tolerance: Standard Class ±0.35% (5-turn), ±0.25% (10-turn); Precision Class ±0.2% (5-turn), ±0.1% (10-turn).
Power Rating: 0.75W for 5-turn, 1.5W for 10-turn.
Insulation Resistance: Over 1,000 MΩ at 500 V.D.C.
Dielectric Strength: 1 minute at 500 V.A.C.
Mechanical Travel: 360º Xn (n: No. of turns).
Max Working Voltage: 450V.
Resist. Temperature Coefficient: ±20p.p.m./ºC.
Mass: Approximately 10g for both 5-turn and 10-turn models.

Design and Installation Notes:

Outer dimensions of the 5-turn version are the same as those of the 10-turn.
Mounting hole on the panel should be processed to a diameter of 7.14mm.
Special specifications include lower resistance values and shaft modifications.

Additional Information: Althen provides calibration, design & engineering, training, and rental services for measurement equipment. Contact information is provided for various regions including Germany, Benelux, France, Sweden, USA/Canada, and other countries.

Catalog excerpts

Multi turn potentiometer 12HP Wirewound (Bushingmount Servomount) with metric dimensions Standard dimensions Bushingmount type With lug terminals Terminal Holes Layout With pin terminals for p.c. board 1pc. Each inner teeth washer and hex nut are attached. Please process the mounting hole on the panel to be mounted with this potentiometer by the diameter of 7.14mm Outer dimensions of 5-turn version are same as those of 10-turn Servomount type with pin terminals for p.c. board is also available Bushingmount type: With lug terminals: 12HP-5 (5-turn) 12HP-10 (10-turn) With pin terminals for pc board: 12HP-5P (5-turn) 12HP-10P (10-turn) Servomount type: 12HPS-5 (5-turn) 10HP

Open the catalog to page 1

SENSORS & CONTROLS ■ General Specifications Standard Resistance Range: Max. Practical Resistance Value: Total Resistance Tolerance: Independent Linearity Tolerance: Power Rating: Noise: Electrical Travel: Mechanical Travel: Insulation Resistance: Dielectric Strength: Starting Torque: Stopper Strength: Max. Torque exerted on fastening the mounting nut to the bushing: Max. Working Voltage: Resist. Temperature Coefficient of Wire: Mass: 360° Xn +1 5)0 (n: No. of turns) Over 1,000 MQ at 500 V.D.C. 1 minute at 500 V.A.C. Within 3mN-m (30gf-cm) (Bushingmount type) Within 2mN-m (20ghcm) (Servomount...

Open the catalog to page 2

12HP

12HP

Catalog excerpts

All Althen Controls catalogs and brochures