Catalogs >
Alphatron Marine >
AlphaMidicourse

AlphaMidicourse
8Pages

Catalog excerpts

>ILPHMR#N Marine AlphaMidiCourse High precision and dynamic gyrocompass

Features The AlphaMidiCourse is a reliable, type-approved gyrocompass for merchant vessels. This gyrocompass is easy to install and requires little maintenance since there's no fluid inside. Alphatron Marine can also supply all peripheral equipment such as repeaters and converters to ensure compatibility with existing installations. • Small size and versatility • Automatic speed error correction • Short initial settling time (within 3 hours) • High reliability • High static and dynamic accuracy1 • Easy installation and adjustment • Built-in testing facility • No compass fluid or extra...

Open the catalog to page 2

AlphaLine Repeater The AlphaLine Repeater displays range provides a heading repeater connectable to gyro, magnetic and GPS compass showing the ship’s heading information. This advanced compass repeater has an analog moving compass card and fixed line. The LCD information screen displays in 5-inch (horizontal and vertical), 6.5-inch and 8.4-inch digital course trend, alarm and rate of turn. Next to the heading repeater we have a more advanced heading+ instrument available, that, in addition to the ship’s heading information, shows an extended scale with accurate analog representation in...

Open the catalog to page 3

A range of accessoires are available for the AlphaMidiCourse. Repeater compass The repeater compass receives and displays the ship’s heading signal transmitted from the master compass. The case is made of Glass fiber Reinforced Plastic (GRP), thus corrosion free and has a waterproof construction, suitable for open deck installation. Repeater stand The repeater stand (height of 1330 mm) can be used when a repeater compass is installed on the deck. Mounting bracket The mounting bracket for the repeater compass has a gimbal ring to support the repeater compass horizontally when the ship is...

Open the catalog to page 4

Advanced gyro element The high precision dynamically tuned gyroscope and gimbal suspension is derived from aerospace technology and is now available to the marine industry. • Unique technology without annual servicing • No oil change • Very low RPM reduces wear, increasing life time • Quick installation Microproccesor control board Sensitive element Gimbal Horizontal control board Phantom ring Shock absorbers Stepper board circuit Sliding contacts Inverter board The optional annunciator unit can be connected to the AlphaMidiCourse to comply to Bridge Alert Management system (BAM). It...

Open the catalog to page 5

Installation Unlike a magnetic compass, it can output without influence of the steel hull, the heading signal to repeaters around the vessel at critical positions. The gyrocompass is typically located below decks as close as possible to the center of roll, pitch and yaw of the ship, minimizing errors caused by the ship’s motion. Repeaters are located at convenient places throughout the ship, such as at the helm for steering, in after steering for emergency steering, and other places. Bearing repeaters installed on the bridge wing used for taking bearings will likely be equipped with...

Open the catalog to page 6

Tech Specs Main unit Weight 23 kg (50.7 lbs) 0 to 50 knots Follow up speed >75°/sec Settling time within 3 hours Settle point accuracy <±0,3° Dynamic accuracy <±0,5°/sec Settle point repeatability <±0,2°/sec Service life 35.000 hours Control unit Weight 7 kg (15.43 lbs) 1x step; 24V DC, 6 steps/° 4x serial data; RS422/485 Serial data transfer rate; IEC61162-1/2 (4800/38400 bps) 24V backup supply Failure/alarm; NO relay/NC relay Power 24V DC, 70W AlphaLine Repeater (option) 3803.0242 (grey), 3803.0244 (black) Weight 1.23 kg (2.71 lbs) 4 display sizes available Alarm signal loss...

Open the catalog to page 7