ALPHACOURSE G BEARING REPEATER Alphatron Marine is Importer, Developer and Manufacturer of state of the art navigation, communication and control equipment for the Maritime market. Alphatron Marine is also supplier of communication, IT and entertainment equipment for maritime and land applications. Our knowledge and experience will result in a suitable solution for your specific query. After the installation you can trust on a dedicated service team. 24/7 all over the world… The Alphacourse G is the Steering Repeater Compass for the Alphaminicourse gyro compass with vernier card with LED’s, a dimmer and an automatic heading alignment switch built-in. The repeater has an analogue display for the indication of the heading display provided from the gyro compass. The display is divided into a 360 deg/round outer scale and a 10deg/round inner scale. The Alphacourse G is provided with galvanic isolation. The serial signal for this repeater compass is RS422 with a maximum of 3 circuits. The Alphacourse G is Wheelmark approved.

ALPHACOURSE G STEERING REPEATER FRONT VIEW POINTER; ZERO ADJUSTMENT SWITCH; Used when a shift in the value is indicated by the repeater compass POINTER; SCALE; 360 deg/round. FAIL INDICATOR (red); is lit or blinks when an error is detected. SCALE; 10 deg/round. DIMMER CONTROL; Adjusts the illumination of the compass card and run indicator lamps. RUN INDICATOR LAMP (green); Blinks when zero adjustment is being carried out. DIMMER CONTROL; Adjusts the illumination of the compass card and run indicator lamps. RIGHT SIDE VIEW GLAND / CONNECTOR; Connection to compass. GLAND; Connection to Master compass...