Crane

Crane

Crane

Product catalog summary
Overview: The document provides technical specifications and features of the ALMAR deck crane product line, designed for lifting dinghies and jet-skis onto fly-bridges or bathing platforms. It highlights the innovative design that eliminates traditional winches, ensuring no rope entanglement or damage.
Specifications:
  • Crane Jib Length: 2100 mm for DK 25/210 and 2500 mm for DK 45/250.
  • Maximum Lifting Load: 250 kg for DK 25/210 and 450 kg for DK 45/250.
  • Height: 400 mm for DK 25/210 and 500 mm for DK 45/250.
  • Lift Crane Jib: 1400 mm for DK 25/210 and 1500 mm for DK 45/250.
  • Lift Rope: 5000 mm for both models.
  • Swivelling Range: 300° for both models.
  • Rotation: Manual or hydraulic for both models.
  • Weight: 60 kg for DK 25/210 and 180 kg for DK 45/250; including hydraulics, 82 kg and 210 kg respectively.
  • Hydraulic System: Double active for crane jib and rope.
  • Power Supply: 12/24 Volt, depending on the onboard electronics.
  • Control System: Stationary or flexible remote control.
Construction and Materials: The cranes are constructed from stainless steel with a special surface treatment. Installation requires six screws onto the bottom plate, and a counterplate with a supporting tube is necessary for fly-bridge mounting to ensure maximum stability.
Innovations: The design excludes traditional winches, using a new rope system that prevents entanglement and damage. The hydraulic system allows for crane jib and rope movement, with manual or hydraulic rotation options.
See more

Catalog excerpts

Crane-1

Drehbewegung manuell manual crane jib rotation • Basismaterial Edelstahl, mit Oberflàchenschutz basic material stainless steel, with special surface treatment • Kranarm auf / ab und Seilbewegung ein / aus durch Hydraulik crane jib up / down and rope movement in / out by hydraulic • Kranarmdrehbewegung manuell oder hydraulisch manual or hydraulic jib rotation • flexible Fernbedienung flexible remote control • keine Seilbeschàdigung möglich, durch Hydraulik-Seileinzug no rope damage possible, due to hydraulic rope drawing-in • Drehbewegung manuell oder hydraulisch manual or hydraulic crane jib rotation Die ALMAR Deckkran Baureihe wurde entwickelt urn Beiboote und Jet-Ski auf die Fly-Bridge oder Badeplattform zu heben. The ALMAR deckcrane product line was developed to lift dinghies and jet-ski onto the fly-bridge or bathing platfom. Bei dieser Konstruktion wurde auf herkömmliche Winchen verzichtet und dafür neue Wege bestritten. At this construction the ordinary winch has been redesigned and new methods have been applied. Durch das neue System werden Seilverschlingungen oder Beschàdigungen ausgeschlossen. Mit stabilem Deck erfolgt With this new rope system intwist or damages are impossible. With a stable deck the installation is done die Montage mittels 6 Schrauben an der Fuliplatte. Beim Anbau auf der Fly-Bridge ist es notwendig eine Gegenplatte mit with 6 screws onto the bottom plate. When connecting it with the fly-bridge it is necessary to use a counterplate with Stützrohr zu verwenden, urn gröfStmögliche Stabilitàt zu erreichen. supporting tube to achieve utmost stability. AUSTRIA email: [email protected]

 Open the catalog to page 1
Crane-2

technical data Ànderungen vorbehalten!

 Open the catalog to page 2

All Almar catalogs and brochures

  1. GTL42_270_D

    10  Pages

  2. Stern thrust

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.