ANTISTATIC CLEAR COAT HHS 282

Product catalog summary

Overview: The document provides technical information about a 2:1 Antistatic Clear Coat, highlighting its advantages, specifications, and application procedures. It is designed for use in automotive, industrial, and nautical sectors.

Advantages:

Very high solid content ensuring no loss of shine or thickness.
Enhanced antistatic control, making it dust repellent.
Less sensitivity to silicone or oil issues.
Easy leveling, reducing the need for excessive product use.
Non-yellowing due to advanced UV protection.
Does not distort metallic finishes.
Easy to polish and can be applied in a single coat.
Increased vertical stability and faster curing time (25 minutes at 60°C).

Specifications:

Mixing ratio: 2:1 with a specific hardener.
Pot-life at 20°C: 5-6 hours.
Spraying viscosity: 18±1 seconds using Ford Cup Ø 4 at 20°C.
Recommended spray gun nozzle size: 1.2 - 1.4 mm.
Air pressure: 3 - 3.5 bar.
Dry to assemble time: 12-16 hours.
Storage: 2 years in a cool and dry place.

Application Recommendations:

Due to high solid content, air drying is not recommended; use a spray booth.
Ensure proper time between coats for optimal results.
Apply one full coat or one light coat followed by another coat.

Environmental and Safety Considerations:

Low VOC content of 418 g/L, compliant with regulations.
High resistance to weathering and environmental pollution.

Additional Information:

Product is transparent and compatible with both water and solvent-based systems.
Evaporation adjuster available for use at 5% concentration.

Catalog excerpts

Very High Sol id (Don’t loose shine or thickness) More Antistatic C ontrol (Dust repellent) Less sensitive to the silicone or oil problem Extra Easy Levelling (don’t need to charge for have a good levelling, save quantity & money) Not yellowing (newest UV protection) Does not magnify metallic (will not distort the metallic) Increased Vertical Stability ANTISTATIC FACTOR SIGNIFICANT REDUCTION OF NIBS ViaAzzano San Paolo 32/C - 24050 Grassobbio (BG) ITALY Tel. +39-035 525616 - Fax +39-035 526199 [email protected] - www.allchem.it

Open the catalog to page 1

SCHEDA TECNICA - TECHNICAL INFORMATION - TECHNISCHE INFORMATIONEN - INFORMATIONS TECHNIQUES 282 HHS CLEAR COAT is an Extra High Solid & High Gloss clear coat. Is made with the newest technology for guarantee You a simple application with the best result. It can be applied Highly Efficiently in one application without flash-off between coats. Good filling power. The High Productivity can reduce the the working time and cost. Its high resistance to the effects of weathering and environmental pollution ensure a durable protective paint film. UV protected. / •Solid content Very High • Easy to spray...

Open the catalog to page 2

ANTISTATIC CLEAR COAT HHS 282

ANTISTATIC CLEAR COAT HHS 282

Catalog excerpts

All Allchem Srl catalogs and brochures