*mynauticexpo

463

463

Product catalog summary

Product Overview:
Nano Ceramic Polymer Sealant by ALLCHEM is designed for long-lasting protection of automotive surfaces. It offers a super deep gloss, easy application, and a wet look finish. The sealant provides protection for up to 150 hand washes and is immediately super hydrophobic. It contains very fine abrasives to remove light scratches and can be applied by hand or machine. Suitable for paints, clear coats, and gelcoats, it also offers UV protection.

Key Features:

Super hydrophobic effect guaranteed.
Max gloss result with significant reduction in protection time.
Available in various package sizes: 50 ml, 125 ml, 250 ml, 500 ml, and 1 L.

Usage Instructions:

Designed for fast and clean use without water.
Removes defects permanently without cosmetic oils.
Suitable for all automotive paints, including ceramic anti-scratch paints and new water-based clear coats.
Ammonia and silicone-free with low VOC content.

Health & Safety:

Non-irritant, non-harmful, and non-flammable.

Application Tips:

Use with DA Polisher or air sander and appropriate foam pads.
Do not use excessive product or add water.
Clean surface with 445 Hologram Controller or IPA Alcohol before application.
Allow product to adhere for 30-60 minutes before removing residue.
Avoid washing the car for 4-5 days post-application; use only neutral shampoo for hand washes.

Technical Description:

Composition: Emulsion with inert inorganic abrasives.
Appearance: Fluid gel, green color.
Fragrance: Characteristic.
Miscible in water with a shelf life of 18 months if stored properly.

Catalog excerpts

IMPROVED FORMULA b Super deep gloss b Easy-on & easy-off b Wet look B Long lasting protection (150 hand washes) B Immediatly super hydrophobic B Very fine abrasive (remove light scratches) B Apply by hand or by machine b For paints, clear coats and gelcoats B UV protection inside B Light cut & protection B Light green color GUARANTEED Super Hydrophobic Effect NANO CERAMIC j POLYMER SEALANT a PER TUTTII TIPI Dl VERNICE a A BASE ACQUA a CONTIENE PTFE MAX GLOSS RESULTSIGNIFICANT REDUCTION OF PROTECTION TIME PAINT PROTECTION SYSTEM a FOR REFINISHING ALL TYPES OF AUTO-PAINTS a WATER BASED a CONTAINS PTFE CLEAR COAT COLOR BASE COAT PRIMER COAT BODY PANEL FINISHING SYSTEM CUTTING ACTION ALLCHEM srl - Via Azzano San Paolo 32/C - 24050 Grassobbio (BG) ITALY Tel. +39-035 525616 - Fax +39-035 526199 - [email protected] - www.allchem.it

Open the catalog to page 1

A 463 USE_ Very light abrasive polymer polish for the treatment of surface who leave an invisible protection film against the contamination. Increase the gloss of Your car. Increase the paint life by 40-50%. Reduce dirt accumulation by 70-80%. Product designed and developed for a fast and clean use without addition of water. It allows you to see immediately the removal of the defect. Reduced working time. The product doesn't hide imperfections, scratches and holograms with cosmetic oils, but it removes them permanently. A USAGE_ On all automotive paints, included: acrylics, water-based, high...

Open the catalog to page 2

463

463

Catalog excerpts

All Allchem Srl catalogs and brochures