*mynauticexpo

439IM

Product catalog summary

Product Overview: The 439IM Ceramic Ultrafine Fast Cut is a polishing system designed for achieving a brilliant mirror finish on original equipment painted surfaces. It is suitable for use with both rotary and orbital polishers and is effective on old, fresh, and scratch-resistant paints. The product ensures a super bright final result without dullness or holograms, providing unmatched color depth.

Key Features:

Eliminates P3000 sanding marks, hazes, dullness, and holograms.
Easy to wipe off and does not dry under sunlight.
Ideal for dark colors with maximum color depth.
Long-lasting results without halos and holograms.
Low consumption with no dust or splatter.
Approved for use in OEM car plants.
No holograms even after washing or cleaning with IPA.
Drastic reduction in polishing time.

Packaging Options: Available in 50 ml, 250 ml, 500 ml, 1 L, and 5 L sizes.

Technical Description: The product is free of fillers, ensuring permanent removal of defects rather than masking them. It can be used in a single step or as a second step after abrasive action with other products. It is free from silicone and ammonia, with very low VOC content, and is non-irritating, non-harmful, and non-flammable.

Usage Instructions:

Apply a quantity of 438IM Ultrafine Cut on the surface or pad.
Polish small areas with medium pressure until defects are removed (10-15 seconds).
Reduce pressure to restore maximum shine.
Remove residues with an ultramicrofibre cloth or mechanically with a polishing microfibre pad.
For protection, follow with 453 Glossy, 471, or 571.
For long-term protection, apply 463 Paint Sealant.

Composition and Storage: The product is an emulsion containing inert inorganic abrasives, appearing as a neutral gray gel with a marine woods fragrance. It is miscible in water and should be stored at room temperature in sealed bottles for up to 24 months.

Additional Information: Various pad options are available for different levels of cut and gloss, with specific codes for ordering.

Catalog excerpts

CERAMIC ULTRAFINE FAST CUT HOLOGRAM FREE FINISH SUPER GLOSS GUARANTEED FORMULA Very High Definition (brilliant mirror finish) a Eliminates P3000 sanding marks, hazes, dullness and holograms a Easy to wipe off © It does not dry even if used under the sun's rays © Ideal for dark colors © Maximum color depth © Long-lasting result over time without halos and holograms. Sanding marks do not coming back Qt Low consumption tt Do not dust, Do not splatter tt Developed for OEM car plant No holograms even after washing or cleaning the part with IPA & ABRASIVO ULTRAFINE HOLOGRAM FREE POLISH DEEP & PURE RESULT DRASTIC REDUCTION OF POLISHING TIME oie FINISH, SILICONE FREE FINISHING SYSTEM PACKAGING AVAILABLE CUTTING ACTION ^HIGH NONE — ALLCHEM srl - Via Azzano San Paolo 32/C - 24050 Grassobbio (BG) ITALY Tel. +39-035 525616 - Fax +39-035 526199 - [email protected] - www.allchem.it

Open the catalog to page 1

Of 438IM ULTRAFINE CUT It is a polishing system developed for the mirror finish of original equipment painted surfaces. It can be used with both rotary and orbital polishers. Excellent on old, fresh and scratch resistant paints. Leaves a super bright final result without dullness and holograms. Unmatched color depth. DEFINITIVE REMOVAL OF THE DEFECT. The product being free of fillers, does not mask imperfections, scratches and holograms with cosmetic oils, but removes them permanently. It can be used in a single step or as a second step after the abrasive action with 487Extreme, 497 or 483. CLEAN...

Open the catalog to page 2

439IM

439IM

Catalog excerpts

All Allchem Srl catalogs and brochures