MOPX Separation Systems
4Pages

{{requestButtons}}

Catalog excerpts

MOPX Separation Systems - 1

Separation Systems Purification or clarification of distillates, marine diesel oils, intermediate and heavy fuel oils, and lubricating oils used In marine Installations and power stations. The MOPX separation system (Fig. 1) Is designed for auto- matic intermittent discharge of separated sludge. Each MOPX Separation System (Fig. 2) comprises: • ancillary equipment including EPC-41 control unit. The separator can be delivered with or without bullt-on feed pump. An Installation with a separate feed pump is recom- The main features of the system are: • Simple and robust design. • EPC-41 electronic control unit with built-in PI temperature controller for any type of steam heater or Heatpac electric Fig. 1. MOPX separator system. • Flexibility. The self-cleaning bowl may be used either • Simple installation, operation and maintenance as a result of few and simple components. • Preventive maintenance program for improved operational safety and cost control with standardized service kits. Fig. 2. Basic system concept.

Open the catalog to page 1
MOPX Separation Systems - 2

MOPX purifier MOPX clarifier 4 Make-up and closing water Inlet 5 Opening water Inlet 6 Inlet for water seal and displacement System working principle The MOPX Separation System is control unit, except for starting the The MOPX separator bowl can be arranged as a purifier or as a clarifier. A purifier separates sludge and water from the oil. Water is continuously dis- charged from the bowl. The sludge accumulated in the sludge space in both a purifier and a clarifier is inter- mittently discharged. In a clarifier, the water outlet is blocked i.e. the water handling capability is limited. In...

Open the catalog to page 2
MOPX Separation Systems - 3

The MOPX Separation System is de- signed for automatic operation in peri- odically unmanned engine rooms at sea and automated power stations ashore. Each MOPX separator Is equipped with its own EPC-41 unit and ancillary equip- ment, forming an Independent system. MOPX Separation Systems may be operated in single, In parallel or In series. For cleaning of distillate, marine diesel oil, and lubricating oil, MOPX Separation Systems should be operated in single or parallel configuration, depending on prevailing operational conditions. The separators must then always be oper- If more than one...

Open the catalog to page 3
MOPX Separation Systems - 4

Throughput Capacities Blue bars indicate range from maximum recommended capacity on recommended capacity on distillate information on throughput capacities see separate capacity table for Indi- vidual model. The separation system with supplemen- tary equipment can be delivered as a standardized plug-in unit, suitable for both marine and power Installations. Technical documentation Complete information and documen- tation accompany each separation system. Complete System Manual covering separator and ancillary After Sales support A Preventive Maintenance Program has been developed, with two...

Open the catalog to page 4

All Alfa Laval Mid Europe catalogs and brochures

  1. i-40D

    4 Pages

  2. PureBilge

    20 Pages

  3. F-152

    4 Pages

  4. LPG carriers

    2 Pages

  5. LNG carriers

    2 Pages

  6. PureNOx

    2 Pages

  7. Aalborg TFO

    10 Pages

  8. Aalborg OC

    2 Pages

  9. Aalborg D

    2 Pages

  10. Aalborg KBE

    2 Pages

  11. Compabloc

    4 Pages

  12. Alfa-V ACV

    2 Pages

  13. PureSOx

    16 Pages

  14. PureDry

    4 Pages

  15. AlfaDisc

    2 Pages

  16. MIB 303

    4 Pages

  17. Here30_ENG.pdf

    36 Pages