Catalogs >
Airmar >
In-Hull Transducers

In-Hull Transducers
2Pages

Catalog excerpts

In-Hull Transducers 1 kW, High-Definition Digital Broadband • Adjustable from 2° to 22° of deadrise • Epoxies to aluminum hulls under 3.8 mm (0.125”) thick • Broadband Ceramic Technology: • Crystal clear image detail and resolution • istinguishes individual fish targets and D fish tight to the bottom • 600 Watts • Depth Only • In-Hull, Plastic Housing • 50/200 kHz • Q at 50 kHz—28 Q at 200 kHz—31 • 7.6 m (25’) cable with OEM connector • Beam Width: 50 kHz—45° 200 kHz—12° • Maximum Depth Range: 50 kHz—206 m to 294 m (700’ to 1,000’) 200 kHz—118 m to 180 m (400’ to 600’) • Boat Size: Up to 8 m (25’) • 1,000 Watts • Depth Only • In-Hull, Plastic Housing • Separate ceramics for 50 kHz and 200 kHz • Q at 50 kHz—8 Q at 200 kHz—8 • 12 m (39’) cable with OEM connector • Beam Width: 50 kHz—19° 200 kHz—6° • Maximum Depth Range: 50 kHz—529 m to 735 m (1,800’ to 2,500’) 200 kHz—206 m to 294 m (700’ to 1,000’) • Boat Size: 8 m (25’) and up Tunable, Broadband Transducers for FM & CHIRP Enabled Sounders • 2,000 Watts RMS, 20 to 30 continuous Watts • Depth Only • Thru-Hull, Epoxy Housing • Operating Frequencies: LF—38 to 75 kHz HF—130 to 210 kHz • 15 m (50’) cable • Beamwidth (Adjustable): LF—11° x 17° to 6° x 11° HF—7° to 5° • Boat Size: 12 m (40’) and up • Optionally available as R199LM, low & medium-frequency (85 to 135 kHz) • 2,000 to 3,000 Watts RMS, 30 to 60 continuous Watts • Depth Only • In-Hull, Epoxy Housing • Operating Frequencies: LF—28 to 60 kHz HF—130 to 210 kHz • 15 m (50’) cable • Beamwidth (Adjustable): LF—11° x 17° to 6° x 11° HF—7° to 5° • Boat Size: 9 m (30’) and up • Optionally available as R299LM, low & medium-frequency (85 to 135 kHz) In-Hull Transducers In-Hull Transducers • Designed for all types of solid fiberglass hulled boats • Depth Only • Mounts in a tank inside the hull • Non-toxic anti-freeze (propylene glycol) is used to fill the tank • Installation and servicing can be done while the vessel is in the water • No holes to drill through the hull • Great high-speed performance up to 35 knots (40 MPH) • Hull Deadrise Angle: —0° to 22°—P79, P89, R199 —0° to 30°—M260

Open the catalog to page 1

Number of Elements and Configuration Beam Width (@-3 dB) Number of Elements and Configuration 45° BEAM DIAMETER VS DEPTH 50 kHz Pulse Power Pulse Power BEAM DIAMETER VS DEPTH ©Airmar® Technology Corporation In_Hull_PC_rJ 05/11/11 As Airmar constantly improves its products, all specifications are subject to change without notice. All Airmar products are designed to provide high levels of accuracy and reliability, however they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques. TRIDUCER® and Xducer ID® are registered trademarks of...

Open the catalog to page 2

In-Hull Transducers 2Pages

Catalog excerpts

All Airmar catalogs and brochures

In-Hull Transducers
2Pages