Catalog excerpts
Freestanding windsock Quick to set up with single clip, without halyard Universal for all panels and all boats, including power boats and catamarans Efficient (rigid structure = better air flow) Assembly involves pinching the lower hoop through the panel before releasing it inside. The stainless steel clamp then secures it in place. So there’s no need to tie the base to the panel and the top of the panel to a halyard attached to the mast, as is the case with older models. This freestanding windsock is therefore the only one that can be used on powerboats and catamarans, and the only one that can be fitted on different panels of a sailboat. Two sizes Medium and Large cover the full range of applications. The clamp is suitable for deck thicknesses up to 12 cm. pour panneaux < 40 cm pour panneaux > 40 cm
Open the catalog to page 1Quick to set up with single clip, without halyard Universal for all panels and all boats, including power boats and catamarans Efficient (rigid structure = better air flow) Assembly involves pinching the lower hoop through the panel before releasing it inside. The stainless steel clamp then secures it in place. The clamp is suitable for deck thicknesses up to 12 cm. Removable, elasticated mosquito net to be positioned on the inner band of the windsock. Modele pour Laterale Modele M □ Modele L t pour panneaux < 40 cm pour panneaux > 40 cm
Open the catalog to page 2