Elektron Laser Z Cutter
2Pages

{{requestButtons}}

Catalog excerpts

Elektron Laser Z Cutter - 1

Ctrm.jjiE.ttzi-- Ekjrrtr-triLiz.tJ. ~Rab.atLc 'PLtrtttsM^CuMi LASER SPEED ~ LASER PERFORMANCE WITH A HOT-KNIFE PRICE TAG The Aeronaut Elektron Laser Z is a compact high-performance and low-cost laser cutter intended for cutting and edge sealing lightweight textiles such as ripstop Nylon and light Dacrons. The Elektron Laser Z is a heavy duty production machine capable of cutting in excess of 1 metre per second. This laser cutter has been designed for industries such as paragliding manufacture, kite and sail making, where high cutting speeds and edge sealing are required on light fabrics. Since the laser power needed to cut these materials at speed is relatively low, Aeronaut have fitted a lightweight all-metal sealed laser to the rigid, easy to accelerate Elektron chassis. The result is a breakthrough in performance and price. Since there is no contact with the fabric when laser cutting, plotting is fast and very reliable. Cut patterns release cleanly. Nesting margins can be less than a millimetre. The result is big cost savings in time and fabric. Laser power can be accu- rately controlled for marking, perforating or kiss cutting. The Elektron Laser Z can be supplied with air or water cooled lasers and is fitted with a marker pen holder and efficient fume extraction. The metal sealed laser has a very low running cost with over 35,000 hours before re-gassing. The Elektron Laser Z is an industrial revolution... Small size, clean design, rational engineering, the best price- performance ratio. And the best price tag in the industry. Very High Cut Speeds High reliability Variable output power Simple setup Very low running cost All-metal laser Lightweight rigid chassis High torque motors Very simple construction Accurate, smooth cutting Affordable purchase price Easy servicing Compatible with most software & computers Widely available spares Rigid guide extrusions TtcTttrnnur ft UT trmnTi trn ~ 4-6 TEPKO ROAD TERREY HILLS NSW 2084 AUSTRALIA PHONE (61-2) 9450 0800. FAX (61-2) 9450 0477 www. AERONAUT.ORG EMAIL INFO@AERONAUT.ORG

Open the catalog to page 1
Elektron Laser Z Cutter - 2

Product Specifications Water & Air cooled CO2 Lasers Quiet, efficient fume extraction High torque rare earth motors standard. Micrometer adjustable focus Low cost marker pens Full safety interlocks Available with and without vacuum table 25mm wide drive belts throughout. Quality Robotic cables running in energy chain • Simple rugged construction • Simple to use and cheap to maintain • Quiet, high speed operation • Variable power output • Cut, perforate, drill & edge-seal • Improved product quality • No un-cut threads or hangers • Minimal plotting errors • Easier cutting on difficult fabric...

Open the catalog to page 2

All AERONAUT catalogs and brochures

  1. Elektron_B1

    2 Pages

Archived catalogs

  1. Vacuum Table

    16 Pages