Codice: 3gneoo Nitro Satin Enamel NEUTRAL BASE FOR TINTING SYSTEM USE Fast-drying enamel for steel and wood substrates pre-treated with suitable primers. Performs a satin finish with good characteristics of flexibility. Dry film thickness advised 40 dry microns Colour mixing by weight 85 parts of Neutral Base with SURFACE PREPARATION AND APPLICATION Bare Steel. If sandblasting is not possible, remove all traces of corrosion by mechanical wirebrush or sanding disk. Dust off, degrease the substrate with Nitro Thinner 723. Apply 1-2 coats of suitable anticorrosive primer and let dry. Overcoat with 1-2 coats of NITRO? SATIN ENAMEL allowing the required waiting time between coats. Painted steel. Remove any loose or powdery paint with a scraper. Remove trace of corrosion with a mechanical wirebrush or sanding disk and sandpaper the surface with medium abrasive paper (280-320). Dust off and degrease the surface with Nitro Thinner 723. Apply as soon as possible one coat of anticorrosive primer onto the bare parts of the surface and a second one if required. Let dry and apply 4-8 hours. Overcoat with 1-2 coats of NITRO SATIN ENAMEL allowing the required waiting time between coats. Bare Wood. Onto dry, clean and well seasoned wood apply a first coat of TURAPORI AM//9 to seal the pores of wood and sandpaper after 2-4 hours. Overcoat with 1-2 coats of NITRO? ?SATIN ENAMEL allowing the required waiting time between coats. Painted wood. Remove any loose or powdery paint with a scraper and sandpaper with medium abrasive paper (280-320). Rinse with suitable detergent product and let dry. Overcoat with 1-2 coats of NITRO? SATIN ENAMEL allowing the required waiting time between coats. AEMME COLORI SRL, Via Patta 12, 24020 Ranica (BG), Italy Tel: +39 035.513373- Fax: +39 035.513211 - Mail: [email protected]

Nitro Satin EnamelColorsColors: : NEUTRO Color code:: 3GNE00SAFETY PRECAUTIONS Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff. NOTES The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study...