Actisense Award Winning NMEA Specialists J---- ---m li ii f The ideal solution for accurately monitoring the voltage on an NMEA 2000 network. The TER-U acts as an intelligent diagnostic terminator providing instant feedback as to the state of the voltage on your NMEA2000 bus. It is also a universal terminator, allowing it to be used either in-line, for applications at the top of masts,or at either end of the NMEA2000 bus as a regular terminator. Use the blanking caps supplied to keep the unused connectors clean. It has a built-in, high accuracy voltage monitoring circuit which continuously checks the bus voltage, and will illuminate its internal LEDs when it detects that the bus voltage is of the correct polarity. In addition, when it detects that the voltage is within the minimum required range, it will indicate 'GREEN' immediately, providing continuous valuable feedback as to the state of the bus voltage. If the voltage falls below the minimum required level of 9.0V, then the LED's will illuminate 'RED', showing there is a potential problem with the NMEA 2000 bus power. Similarly, if the LED's do not illuminate at all, this would indicate that there was no power or that the polarity was incorrect. BP BRITISH MARINE LEADING THE INDUSTRY £ Actisense t: +44 (0)1202 746682 e: [email protected] www.actisense.com