Soundac PU D30
2Pages

{{requestButtons}}

Catalog excerpts

Soundac PU D30 - 1

Acoustics & NoiseReduction component polyurethane viscoelastic damping layer is polyurethane polymer together with the steel sheel constraining layer, a final structure with very high loss tactor over a wide range. This dramatically recuces noise generated by ana easy to combine wilh absorbing loams anti drumming ot walls, non horizontal floors reduced vibration levels of steel These materials are always Acoustics 8 NoiseReduction International BV - Celsiusstraat 26 - 1704 RW Heerhugowaard - The Netherlands Chamber ot Commerce Alkmaar 37141455 VAT. No 8193.59154.B.01 Bank account: ING-Bank - IBAN: NL94 ING B 067S 800599 - BIC: INGBNL2A

Open the catalog to page 1
Soundac PU D30 - 2

Converting Loss factor 4 mm steel, 2 mm PU-D30, 2 mm steel Pre-treatment of surface: Aluminium and stainless steel to be painted with wash primer. Steel to be sand blasted or painted. Before use the A and B components shall be thoroughly mixed together. Observe that the pot life after mixing is about 30 minutes. o Soundac® PU-D30 Soundac® PU-D30 Soundac® PU-D30 C o After mixing the Soundac® PU-D30 may be trowelled out to specified thickness and the constraining metal sheet laid down in the wet layer. For vertical applications the constraining layer must be supported during the drying time....

Open the catalog to page 2

All Acoustics & NoiseReduction catalogs and brochures

  1. Soundac PVP

    2 Pages

  2. Soundac AGLP

    2 Pages

  3. Soundac ASM

    2 Pages

  4. Soundac AS

    2 Pages

  5. Soundac BPAA

    2 Pages

  6. Soundac IS

    2 Pages