Soundac® Convoluted Foam Sound absorption with egg crate structure Description Soundac® convoluted foam is a sound absorbing polyurethane foam with an open cell structure. Soundac® convoluted foam can be used as a sound absorbing foam in dry and clean areas. In areas where there is the possibility of splash water or oil, we recommend Soundac® AS with its water and oil resistant finishing. Soundac® 8+12 Soundac® S10+20 Soundac® S20+30 polyether polyether polyether Stock These materials are produced in standard sizes and are always in stock. Product specification can be tailored to meet your requirements. We would be pleased to make you an offer free of obligations in the various types and sizes. Acoustics & NoiseReduction BV - Celsiusstraat 26 - 1704 RW - Heerhugowaard tel. +31 (0)72 57 27 390 - fax +31 (0)72 57 21 256 - e-mail [email protected] - website www.anr.nl Bankrekeningnr. 67.57.82.775 - K.V.K. nr. 37100240 - BTW nr. 8103.71.315.B.01

Soundac® convoluted foam has been developed for sound absorption in dry and clean areas. It can be applied in engine rooms, compressors, air ducts, generators, pumps etc. Sound absorption coefficient Sound absorption coefficient (α) In emergency exits it is necessary to apply Soundac® ASM with a high flame extinguishing rate. Remove a small part of the covering foil in a corner of the part which has been cut into its right size. Apply this corner on the desired spot. Subsequently gradually remove the covering foil, while simultaneously pressing the foam to the subsoil. Processing Clean the surface...