*mynauticexpo

Soundac ASM

Product catalog summary

Product Overview
Soundac® ASM is a sound-absorbing foam made from melamine with an open cell structure. It is inflammable and available in various thicknesses and colors, including white and gray. The foam is self-adhesive and can be finished with materials like aluminum and black PU.

Specifications

Density: Approximately 10 kg/m³ (DIN 53420)
Temperature Resistance: Continuous up to 160°C, interrupted up to 240°C (DIN 52771)
Burn Rate: B1 UL94 V0, HF-1, FAR FVMSS 320
Toxicity of Smoke Gases: Very low (ATS 1000.001)
Floating Particles Filter: EU 5 of B2 (DIN 24185)
Thermal Conductivity: 0.032 – 0.034 (DIN 52612)
Coloration: Does not turn yellow
Chemical Resistance: U-10
Compression Set: 10% (DIN 53429) with 50% compression during 22 hours at 70°C

Sound Absorption
The sound absorption coefficient is measured according to ISO 10534-2 for various thicknesses of Soundac® ASM.

Installation and Usage
The mounting surface must be free of oil, grease, and water before application. Soundac® can be cut with an electrical knife. Apply by removing a small section of the protective film, adhering it to the surface, and then applying pressure. Ensure all joints are sealed to prevent sound leakage.

Additional Information
Soundac® ASM is highly flame retardant and resistant to organic solvents, acids, and microorganisms. It maintains its surface structure even after prolonged UV exposure. Further details on chemical resistance and fire behavior are available upon request.

Disclaimer
This information is based on general experience and provided in good faith. However, no warranty is implied due to factors beyond control that may affect the product.

Catalog excerpts

Soundac® ASM Inflammable sound absorption foam Description Soundac® ASM is a sound absorbing foam, based on melamine with an open cell structure. Soundac® ASM is standard self-adhesive and can be supplied with many different finishings like aluminium, black PU, perforation etc. Type Density Soundac® ASM25 Soundac® ASM50 Soundac® AS3W Thickness Colour ca. 10 kg/m3 ca. 10 kg/m3 ca. 10 kg/m3 25 mm 50 mm 25 mm white or gray white or gray white Stock ® The Soundac ASM sheets are produced in standard sizes and are always in stock. Product specification tailored to meet your requirements. Please contact us for a quotation and availability in the different sizes. Acoustics & NoiseReduction BV - Celsiusstraat 26 - 1704 RW – Heerhugowaard tel. +31 (0)72 57 27 390 - fax +31 (0)72 57 21 256 - e-mail [email protected] - website www.anr.nl Bankrekeningnr. 67.57.82.775 - K.V.K. nr. 37100240 - BTW nr. 8103.71.315.B.01

Open the catalog to page 1

Specification Sound absorption coefficient to ISO 10534-2 Soundac® ASM is highly flame retardant and has a chemical resistance to organic solvents, acids and micro organism. (DIN 53428 en DIN 53739). Further details on chemical resistance and fire behaviour can be issued on request. Soundac® ASM will not turn yellow. The surface structure remains the unchanged after days of UV- radiation with 200 to 800 NM. Converting Soundac® ASM Soundac® ASM Soundac® ASM Soundac® ASM Soundac® ASM Soundac® ASM Soundac® ASM The mounting surface must be cleaned from oil, grease and water before application. Even...

Open the catalog to page 2

Soundac ASM

Soundac ASM

Catalog excerpts

All Acoustics & NoiseReduction catalogs and brochures