Czech republic e-mail: [email protected] E-mail.: [email protected] © September 2008 ACO Marine. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose and that the actual conditions of use are suitable. This brochure and any advice is provided by ACO Marine free of charge and accordingly on terms that no liability (including liability for negligence) will attach the Company or its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of continuous product development and improvement renders specifications liable to modification. Information provided in this brochure is therefore subject to change without prior notification. ACO PIPE® Push Fit System ACO Marine Product Catalogue

The ACO PIPE® elements are suitable for a variety of applications in the shipping industry due to their flexibility. They offer solutions where high performance is a pre-requisite. Detailed information and guidance on the assessment of system suit- ability and durability against exposure to specific media is available on request. Effective installation is critical in ensuring reliable operation of the pipe system. The quality of the raw materials along with high- quality workmanship during production of ACO PIPE® stainless steel products are indispensable quality assurance factors. Drainage systems...

ACO Pipe® Socket dimensions short socket For pipes and fittings with 2 sockets, both sockets are the same design Threaded Support Pole Support brackets Replacement discs for Cutter Manual Minimum Order quantity - lOpcs. Pipe Cutter Manual Replacement Manual Cutter Disc Order numbers of products fitted with Viton seal are available on request.

Socketed Pipe 125 mm acc. to EN 1124 form Bí Socketed Pipe 160 mm acc. to EN 1124 form Bí Socketed Pipe 200 mm acc. to EN 1124 form Bí Double Socketed Pipe 50 mm Order numbers of products fitted with Viton seal are available on request. Wash Basin Penetration Pipe Seal To aid identification, the seals are colour coded as follows: EPDM seals are BLACK. Viton seals are GREEN, ACO Pipe® Pipe Clamps Socket Clamp Socket Clamp with two screws Order numbers of products fitted with Viton seal are available on request.

Double Socketed Pipe 200 mm Bogen 87,5° nach EN 1124 Form C2 Order numbers of products fitted with Viton seal are available on request. Penetration Pipe acc. to EN 1124 form T2 0AO-A6O AP Deck- and Bulkhead penetrations with special design are available on request.. Toilet Penetration Flange Penetration with Expansion Socket 0AO-A6O AP Deck- and Bulkhead penetrations with special design are available on request. Flange Penetration with Standard Socket 0 A0-A60 AP Deck- and Bulkhead penetrations with special design are available on request. Order numbers of products fitted with Viton seal are...

Double Branch 87.5° acc. to EN 1124 form D2 Double Branch Reduction 87.5° acc. to EN 1124 form D21 Single Branch 45° acc. to EN 1124 form D1 Single Branch Reduction 45° acc. to EN 1124 form D11 Double Branch 45° acc. to EN 1124 form D2 Order numbers of products fitted with Viton seal are available on request. Concentric reduction *AP Increaser Coupling diameter 160/200, 110/125, 125/160 available only as concentric. Connector to other pipe types Order numbers of products fitted with Viton seal are available on request. ACO Pipe® Flanged Connectors Connector with Socket and Flange acc. to EN 1124...

Corner branch 45° reduced ACO Pipe® Connecting pieces Straight Coupling acc. to EN 1124 form F4 Long socket acc. to EN 1124 Form F5 Repair Coupling acc. to EN 1124 form F41 AC0 PIPE repair couplings are used to facilitate in-situ repairs to damaged pipe. Unlike the standard Straight Coupling there is no central registration to limit the insertion depth of the pipe The AC0 PIPE repair coupling slides completely over a pipe joint and is positioned to bridge the required pipe joint. Installation tip: mark the final position of the AC0 PIPE repair coupling on the installed pipe system to ensure the...

ACO Pipe® Threaded Connectors Connector with inner Thread and Spigot Connector with outer Thread and Spigot Connector with Socket and outer Thread Connector with Socket and inner Thread ACO Pipe® Transition pipes Eccentric Increaser Coupling acc. to EN 1124 form F1 Order numbers of products fitted with Viton seal are available on request. Double Branch Reduction 45° acc. to EN 1124 form D21 Corner branch 87,5° reduced Order numbers of products fitted with Viton seal are available on request.

Connector with Flange and Spigot acc. to EN 1124 form M2 ANSI socket flange in acc. DIN available on request. Order numbers of products fitted with Viton seal are available on request. Single Branch 87.5° acc. to EN 1124 form D1 Single Branch Reduction 87.5° acc. to EN 1124 form D11 Order numbers of products fitted with Viton seal are available on request.

Weld on piece with socket form Weld on piece with spigot form E2 with ACO Pipe discharge pipe on ACO CM- X - Steckmuffen with ACO Pipe discharge pipe on LORO - X - and LORO - XC sockets with ACO Pipe discharge pipe on stainless steel-Steckdrain- sockets System AC0 pipe is compatible (can be connected directly to PE, PVC pipe systems) Order numbers of products fitted with Viton seal are available on request. Double Socketed Pipe 75 mm Double Socketed Pipe 110 mm Double Socketed Pipe 125 mm Double Socketed Pipe 160 mm Order numbers of products fitted with Viton seal are available on request.