1. Catalogs
  2. ACO Marine
  3. ACO_Marine_Advanced_Grease_Management_Systems

ACO_Marine_Advanced_Grease_Management_Systems

ACO_Marine_Advanced_Grease_Management_Systems
1 / 28 PagesView full catalog

ACO_Marine_Advanced_Grease_Management_Systems

Product catalog summary
Overview
ACO Marine specializes in providing advanced drainage and wastewater treatment solutions for various types of ships, including mega yachts, cruise vessels, and military ships. Their systems focus on environmentally friendly management of water, emphasizing economic and ecological benefits. Key components include grease traps, biological grease traps, and advanced wastewater treatment systems such as ACO Maripur® and Clarimar®.
Grease Management
ACO grease traps utilize gravity separation to remove fats, oils, and greases (FOG) from water. The system features a sediment basket for larger particles and a separation area for finer solids and FOG. Regular maintenance is essential to prevent system failures due to FOG accumulation.
Grease Separator Sizing
Grease separators are sized using three methods: through flow calculation, customer specification, and meals per day. The through flow method considers the number of people, meals, and peak load factors. The meals per day method is based on the number of courses served, while customer specification relies on specific volume requirements.
Product Information
ECO Mobil 0.3 and 0.5: These units are designed for mobile applications such as snack bars and dishwashers. Made from polyethylene, they include integrated sludge traps and are suitable for temporary installations with specific capacity and connection requirements.
Biological Activators
ACO biological activators provide a safe alternative to caustic cleaners, using enzymes and microorganisms to break down FOG in drainage systems. They are available in various container sizes and can be used in parallel installations to manage hydraulic loads.
Product Overview
The document details technical specifications and product information for ACO Marine Grease Treatment systems, specifically the Lipatomat/Lipator models NS15 and NS20. These systems are designed for grease separation in marine environments and comply with DIN EN 1825 and DIN 4040 standards.
Specifications
  • Nominal capacities range from 10 to 20 NS, with specific dimensions and weights for each model.
  • Constructed from stainless steel (material grade 304) with integrated sludge traps.
  • Equipped with heating cartridges and additional heat insulation to homogenize grease.
  • Electrical connections specified at 230 V with varying power requirements.
Features
  • Includes electrical ball valves for grease and sludge draw-off.
  • Comes with tanks and replacement drums for grease and sediment sludge, each with a capacity of 60 liters.
  • Features an agitating device with a 1-phase alternating current motor.
  • Includes systems for measuring grease layer thickness and drum filling levels.
  • Program control with group fault reporting for central technical supervision.
Installation and Compliance
  • Designed for installation in frost-free environments.
  • Connections for inlet and outflow comply with DIN EN 877.
  • Approved by the Building Supervisory Authority (Z-54.1-452).
Additional Information
Specifications are subject to change without notice due to continuous product development. It is the customer's responsibility to ensure product suitability for intended use. ACO Marine Systems GmbH is based in Germany, and further information can be found on their website.
See more

Catalog excerpts

ACO_Marine_Advanced_Grease_Management_Systems-1

CMYK ACO Marine Grease Treatment Grease Management ACO Marine Product catalogue ACO Marine Advanced Grease Management

 Open the catalog to page 1
ACO_Marine_Advanced_Grease_Management_Systems-2

CMYK ACO Marine Grease Treatment The ACO System Chain provides Drainage Solutions for tomorrows Environment. Stricter rules and regulations on board worldwide operating ships require more sophisticated drainage concepts. ACO provides intelligent solutions which perform in two directions. They protect the humans from the water and vice versa. Every ACO product provides within the ACO System Chain the way to economically and ecologically recycle and re-use the water. Within the ACO Group, ACO Marine provides technical solutions for all kinds of ships in the world wide operating maritime industry,...

 Open the catalog to page 2
ACO_Marine_Advanced_Grease_Management_Systems-3

CMYK ACO Marine Grease Treatment Grease Separation Push Fit Pipe Systems Sewage Treatment Systems ACO Marine ACO Marine is within the ACO Group the world wide contact for advanced onboard drainage and innovative waste water treatment systems. Mega Yachts, Cruise Vessels, Ferries, Military Ships, Offshore Platforms and all kinds of Cargo Vessels are equipped and sailing with system solutions, provided by ACO Marine. This includes the advanced waste water treatment system ACO Maripur® and the biological waste water treatment ACO und Clarimar® as well as stainless steel bioreactors up to 350 m³,...

 Open the catalog to page 3
ACO_Marine_Advanced_Grease_Management_Systems-4

CMYK ACO Marine Grease Treatment Content ACO Marine Grease Treatment ACO System Chain Overview Eco Mobil Lipu mobil Biological Grease Trap Installation Operation and maintenance Lipatomat / Lipator NS2 - NS20

 Open the catalog to page 4
ACO_Marine_Advanced_Grease_Management_Systems-5

CMYK ACO Marine Grease Treatment removes any larger par¬ticles that may be present in the drain waste. It is important to note that the sediment basket vol¬ume is limited, therefore any significant amounts of debris should be removed before entering the grease trap or grease separator. The physical capacity of the trap provides a All ACO grease traps work on the same principle of gravity separation. The mixture of contaminated water and fat, oil and grease (FOG) flows into the device by passing a sediment bas¬ket. The sediment basket sepa¬ration area where relative density differences allow finer...

 Open the catalog to page 5
ACO_Marine_Advanced_Grease_Management_Systems-6

CMYK ACO Marine Grease Treatment BASIC CALCULATION FOR ALL ACO MARINE GREASE SEPARATORS INSTALLATIONS: Example: Cruise Ship with 1.100 persons on board Based on different sizes of ships and different design criteria, three grease trap and grease separation methods are used: Method 1: Through Flow Calculation Persons onboard x Meals per day x Waste Water per meal x Peak Load Factor = Through Flow in litter per second Operation Time in Hours x 3,600 seconds 1.100 x 4 x 10 x 22 = Through Flow in litter per second = Through Flow in litter per second = Through Flow in litter per second Method 2: Calculation...

 Open the catalog to page 6
ACO_Marine_Advanced_Grease_Management_Systems-7

CMYK ACO Marine Grease Treatment ACO Marine Grease Treatment overview ECO Mobil 0,3 Lipu Mobil Lipator / Lipatomat Biological grease trap

 Open the catalog to page 7
ACO_Marine_Advanced_Grease_Management_Systems-8

CMYK ACO Marine Grease Treatment ECO mobil 0,3 Product Info: ■■ ■■ ■■ ■■ ■■ ■■ Applications: Mobile snack bars Mobile dishwashers Occasional meal preparation Can only be used with Connection of 1 industrial dishwasher with a minimum washing time of 1 min. with a changeover time of 1/2 minute (total cycle time tz = 1½ min.) Rinsing water consumption of the industrial dishwasher vs = 5 l Alongside the dishwasher, max 1 item of equipment for pre-rinsing the dishes (briefly) can be connected. Made from polyethylene, material LLDPE For mobile dishwasher systems (no fixed installation) With integrated...

 Open the catalog to page 8
ACO_Marine_Advanced_Grease_Management_Systems-9

CMYK ACO Marine Grease Treatment ECO mobil 0,3 Accessories Accessories: Frame with castors Description - Made from stainless steel, material grade 316 - With 4 feed rollers - Weight: 19kg

 Open the catalog to page 9
ACO_Marine_Advanced_Grease_Management_Systems-10

CMYK ACO Marine Grease Treatment ECO mosbil0,5 Accessories mobil 0,3 Product Info: ■■ ■■ ■■ ■■ ■■ ■■ Applications: Mobile snack bars Mobile dishwashers Occasional meal preparation Can only be used with Connection of 1 industrial dishwasher with a minimum washing time of 1 min. with a changeover time of 1/2 minute (total cycle time tz = 1½ min.) Rinsing water consumption of the industrial dishwasher vs = 5 l Alongside the dishwasher, max 1 item of equipment for pre-rinsing the dishes (briefly) can be connected. Made from polyethylene, material LLDPE For mobile dishwasher systems (no fixed installation)...

 Open the catalog to page 10
ACO_Marine_Advanced_Grease_Management_Systems-11

CMYK ACO Marine Grease Treatment Description Inlet valve DN 50 Suitable for - ECO - Mobil - Multi.Mini Description - Made from stainless steel, material grade 316 - With 4 feed rollers - Weight: 19kg

 Open the catalog to page 11
ACO_Marine_Advanced_Grease_Management_Systems-12

CMYK ACO Marine Grease Treatment Lipu mobil ECO mosbil 0,3 Accessories Product Info: ■■ ■■ ■■ ■■ ■■ Applications: Mobile snack bars Mobile dishwashers Can only be used with Connection of 1 industrial dishwasher with a minimum washing time of 1 min. with a changeover time of 1/2 minute (total cycle time tz = 1½ min.) Rinsing water consumption of the industrial dishwasher vs = 5 l Alongside the dishwasher, max 1 item of equipment for pre-rinsing the dishes (briefly) can be connected. Made from stainless steel, material grade 316 For mobile dishwashing equipment With integrated sludge trap Free-standing...

 Open the catalog to page 12
ACO_Marine_Advanced_Grease_Management_Systems-13

CMYK ACO Marine Grease Treatment Lipu mobil Accessories Accessories: Frame with castors Description - Made from stainless steel, material grade 316 - With 4 feed rollers - Weight: 19kg

 Open the catalog to page 13
ACO_Marine_Advanced_Grease_Management_Systems-14

CMYK ACO Marine Grease Treatment Biological Grease Trap Biological activators Unlike strong acid or caustic drain cleaners, ACO biological activator works safely, but more slowly. The biological activator can be used to unblock drains and can be used to replace aggressive caustic and acid cleaners. ACO biological activator works in two distinct ways on the FOG wastes that settle in the drainage pipework and grease trap system: 1) The activator introduces an enzyme that assists the natural biological process of breaking down long molecular chain FOG’s into a manageable solution to then be discharged...

 Open the catalog to page 14
ACO_Marine_Advanced_Grease_Management_Systems-15

ACO Marine Grease Treatment Crease trap connection accessories Kit comprises 2 off stainless steel 110mm to 50mm concentric male/male reducers. Depending upon the installation, flow capacity limitations may be experienced.

 Open the catalog to page 15
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.