A Marinas Dock Accessories
52Pages

Dock Accessories For Accurately Equipped Marinas 35 Sheet pile and support element 37 Walkable mooring fingers 38 Marina gate and handrails 39 Gangway wheels and bench 41 Boat launch ramps 43 Screw pole accessories Voudinkatu 39, 21200 Raisio FINLAND email: info@a-marinas.fi We reserve the right for changes.

ROCK WEDGES ROCK WEDGE, 1 HOLE Rock wedge 1 hole The Rock wedge 1 hole is intended for fixing mooring chains and other constructions to stone materials. The package contains a wedge bit. Drill hole 20 mm ROCK WEDGE CLOSED LOOP —r Rock wedge closed loop The Rock wedge closed loop is intended for fixing mooring chains and other constructions to stone 2£Q The package contains a wedge bit. Drill hole 22 mm ROCK WEDGE, 3 HOLES Rock wedge 3 holes The Rock wedge 3 holes is intended for fixing wood constructions to stone materials. It is fixed to a hole drilled in rock or concrete with a wedge bit...

ROCK WEDGES ANCHORING BRACKET FOR ROCK Anchoring bracket for rock The Anchor Bracket for rock is intended as a mooring point for the anchor chains to the dock, specifically large and heavy duty docks with concrete floats. Package contains parts for one anchoring chain.

STRAIGHT JOINT Straight Joint The Straight Joint is intended for connecting the gangway to the dock. It can also be used to connect pontoons to each other in sheltered conditions. The F-Joint is intended for connecting the gangway to the dock (gangway rolls on shore) or to the ground support on the shore (gangway rolls on the deck of the dock). It can also be used to connect pontoons to each other in sheltered conditions. One T-joint is required for each wooden beam. FLEXIBLE JOINT, STRAIGHT Flexible joint, straight Flexible joint. Straight, is used to connect pontoons with plastic and/or...

F-joint suspension kit, is used for changing the F-joint to a suspension kit. This allows the gangway to move sideways, shall be used together with long gangways and places with harsh conditions.

STEEL SPRINGS Steel Springs The Steel Spring is made of electro-galvanised springsteel. The product is intended for the chain on the shoreside of a heavy dyty concrete pontoon for receiving forces against the chain and lighten the strain Surface treatment: Electrically galvanized (EG zinc) Force before the spring starts to extend: 400 Newton Force in permitted extension length: 2500 Newton Surface treatment: Electrically galvanized (EG zinc) Force before the spring starts to extend: 600 Newton Force in permitted extension length: 5309 Newton Surface treatment: Electrically galvanized (EG...

M-PONTOON CONNECTION M-PONTOON CONNECTION COMPONENTS (2 pes) M-pontoon connection components (2pcs) The M-pontoon joint accessories -kit is intended for connecting heavy duty pontoons to one another. It is installed into a holder, a so called "extension well" that is cast into the pontoon. The complete joint allows the pontoons to move according to the waves. Under normal circumstances two joint parts are used for each extension, one on each side of the pontoon. M-PONTOON FLEXIBLE ANCHOR BRACKET M-pontoon flexible anchor bracket The M-pontoon flexible anchor bracket is intended as a mooring...

ARCH CLEAT MEGA ALUMINIUM Arch Cleat MEGA Aluminium The Mooring cleat arch Mega, aluminium is an extra strong cleat intended for mooring large boats. Material: Aluminium ARCH CLEAT ALUMINIUM Arch Cleat Aluminium The Arch Cleat HDG is intended for mooring medium- sized and even somewhat larger boats, as long as the number of cleats is sufficient in relation to the size of the boat and the predicted amount of strain is taken into consideration during installation. Fasteners Material: Aluminium ARCH CLEAT SMALL Arch Cleat small The Arch Cleat HDG Small is intended for mooring small and even...

This stainless steel cleat, sophisticatedly evocative of traditional bollards, is remarkably strong. It is intended as a fastening point for mid-sized and even somewhat larger boats - as long as there are enough cleats in relation to the size of the boat and the predicted amount of strain is observed during installation. ARCH CLEAT STAINLESS STEEL Arch Cleat Stainless Steel The Arch Cleat, Stainless Steel, is made of polished AISI316 steel. The product is fastened to the wooden deck of the dock and is intended for mooring small and medium-sized boats. Fasteners included. ARCH CLEAT TEAK...

MOORING RINGS MOORING RING SURFACE INSTALLATION Mooring ring Surface Installation The Mooring Ring, 12 mm, Surface Installation is fastened to the wooden deck of the dock and intended for mooring small boats. Because of its small size it can also be fastened to the side of the deck or to a pole. Fasteners included. MOORING RING 16 mm, FIXED TO CORNER Mooring ring 16 mm, Fixed to Corner The Mooring Ring, 16 mm, Fixed to Corner is fastened to the corner of the wooden deck of the dock and intended for mooring medium sized boats. MOORING RING 12 mm, WITH SCREW-ON BOLT Mooring ring 12mm, with...

MOORING RINGS MOORING RING 12x265, THROUGH BOLTED Mooring ring 12x265, through bolted The Mooring ring 12x265 through bolted is fastened to the wooden deck of the dock or other wooden construction, and intended for mooring small and medium sized boats. MOORING RING 16x265, THROUGH BOLTED Mooring ring 16x265, through bolted The Mooring ring 16x265 through bolted is fastened to the wooden deck of the dock or other wooden construction, and intended for mooring small and medium sized boats. MOORING RING, 12 MM, FIXED TO ROCK OR CONCRETE Mooring ring, 12 mm, fixed to rock or concrete The Mooring...

DOCK FENDER "WAVE", LARGE, PAIR Dock fender "wave", large, pair Dock fender with a stylish design. Suitable for horizontal and upright mounting. Package: carton 16 pairs DOCK FENDER "WAVE", SMALL, PAIR ^^^^^^^^^^^^^^^^^^K^^^^^H^^^^^^^^H Dock fender Dock fender with a stylish design. Suitable for horizontal and upright mounting.

DOCK FENDERS FENDER EDGE CORNER Fender edge corner Fender Edge Corner, PVC is a fender mounted to the dock corner. The purpose of the fender is to facilitate going ashore and to protect the boat and dock from FENDER EDGE STAIGHT Fender Edge Staight Fender Edge Straight, PVC is a fender mounted to the dock corner. The purpose of the fender is to facilitate going ashore and to protect the boat and dock from Heavy Duty fender for the dock. Suitable for large Material Rubber FENDER COVER FOR CAR TIRE Fender Cover For Car Tire Fender cover for car tire is used as a fender on the dock, inside a...