Product Uses 3M™ Self-Leveling Seam Sealer is designed for use in the auto body industry and is typically used to replace “roof division channel” sealers, this sealer is not recommended for the repair of vessels designed to contain liquids or liquids under pressure. Use with the following applicators: PN 08117 (manual), PN 08571 (manual), For professional use only. Not intended for retail sale. Performance Properties NOTE: The following times have been determined with ambient air temperature and substrate temperature @ 70°F (21°C) and are considered typical values. NOTE: Apply only to surfaces...

1. Extrude sealer onto surface, being sure to keep end of mixing nozzle submerged in the seam sealer to reduce the possibility of entrapping air in the product. 2. Allow to cure a minimum of 15 minutes before beginning the painting process. NOTE: If the sealer is allowed to cure more than 24 hours, scuff the sealer prior to any painting steps. • Not to be used in direct contact with acid etch primers. • This is a flow grade sealer. Protect any surfaces that it may run, drip or flow onto. Prior to curing, 08307 may be cleaned from most surfaces with an appropriate VOC compliant product for removal...

3M™ Self-Leveling Seam Sealer 08307 Precautionary Information Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOCs) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area. Technical Information The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based...

3M™ Self-Leveling Seam Sealer 08307 Disclaimer Automotive Aftermarket Division 3M Center, Building 0223-4-SE-04 St. Paul, MN 55144-1000 1-877-666-2277 (1-877-MMM-CARS) 3MCollsion.com 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses...