Catalogs >
3M >
Platinum™ Plus

Platinum™ Plus
4Pages

Catalog excerpts

Platinum™ Plus 01131 • 01130 • 01132 • 31139 Technical Data Sheet 3M Part No.(s) 3M™ Platinum™ Plus - One gallon can - 102 fl oz, 3.0 L, 0.80 US gal. 3M™ Platinum™ Plus - Three gallon mechanical dispenser pail 2.2 gallons, 8.3L, 282 fl oz. 3M™ Platinum™ Plus - Three gallon air dispenser cartridge 2.2 gallons, 8.3L, 282 fl oz. 3M™ Platinum™ Plus - Five gallon air dispenser pail - 3.75 gallons, 14.2L Product Description 3M™ Platinum™ Plus is a premium gold lightweight body filler that offers excellent surface adhesion to properly prepared steel, galvanized steel, aluminum, E-coat, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP), concrete and wood substrates. 3M™ Platinum™ Plus is formulated with Stain-free/Tack free resin and is compatible with most base coat/clear coat and waterborne paint systems. Features Creamy formula provides easy mixing & spreading Adhesion Promoted formulation Tack Free / Stain Free resin Vacuum Processed to minimize pinholes Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Part A - Filler Container Base Density Color Flash Point Viscosity @ 77°F (25°C) Brookfield Viscometer Part B - Cream Hardener PN 01131 - One gallon metal can PN 01130 - Three gallon mechanical dispenser metal pail PN 01132 - Three gallon air dispenser fiber cartridge PN 31139 - Five gallon air dispenser metal pail 1.0 oz. plastic tube 2.75 oz. plastic tube Polyester resin with styrene monomer Benzoyl Peroxide

Open the catalog to page 1

For professional use only. Not intended for retail sale. Two component polyester compound used to fill dents, dings, gouges and other cosmetic imperfections on bare steel, galvanized steel, aluminum, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP). May also be used on many industrial and architectural surfaces needing minor repairs. Typical Performance Properties The following times have been determined with ambient air temperature and substrate temperature @ 77°F (25°C) and are considered typical values. SHAPE SAND TIME: 8 to 12 minutes when mixed with 2% hardener by...

Open the catalog to page 2

3M™ Platinum™ Plus 01131 • 01130 • 01132 • 31139 Directions for Use 1. Wash surface with soap and water to remove water soluble contaminants. Follow the soap and water wash with an appropriate VOC compliant product for removal of surface contaminants. Note: If grinding is required use a grade 50 3M™ grinding disc, blow off the sanding dust with clean dry air. When repairing galvanized steel, e-coat, primed/ painted surfaces or aluminum, sand with grade P80 3M™ abrasive to remove the paint/primer. Blow off with clean dry compressed air and re-clean the surface using a clean paper or cloth...

Open the catalog to page 3

3M™ Platinum™ Plus 01131 • 01130 • 01132 • 31139 Storage and Handling HANDLING Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Keep out of the reach of children. Keep container closed when not in use. Avoid breathing of dust created by cutting, sanding, grinding or machining. For industrial or professional use only. Avoid eye contact with dust or airborne particles. STORAGE When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 16 months from the date of manufacture. Store in a dry...

Open the catalog to page 4

Platinum™ Plus 4Pages

Catalog excerpts

All 3M catalogs and brochures

Platinum™ Plus
4Pages