3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 Safety Data Sheet Copyright,2017,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 28-8279-3 Version Number: 2.03 1.1. Product identifier 3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 3M Industrial Adhesives and Tapes Division 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577) Product Identification Numbers 62-5563-1632-1, 62-5563-5232-6 1.2. Recommended use and restrictions on use Recommended use Adhesive 2.1. Hazard classification Skin Sensitizer: Category 1. Reproductive Toxicity: Category 1B. 2.2. Label elements Signal word Danger Symbols Exclamation mark | Health Hazard | Pictograms

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 Hazard Statements May cause an allergic skin reaction. May damage fertility or the unborn child. Precautionary Statements General: Keep out of reach of children. Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Wear protective gloves. Contaminated work clothing must not be allowed out of the workplace. Response: IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical...

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. develop, get medical attention. Eye Contact: Flush with large amounts of water. medical attention. Remove contaminated clothing and wash before reuse. Remove contact lenses if easy to do. Continue rinsing. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information...

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 authorities. Clean up residue. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/intemational regulations. 7.1. Precautions for safe handling Keep out of reach of children. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not...

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity. Gloves made from the following material(s) are recommended: Polymer laminate If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results...

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Heat 10.5. Incompatible materials Alcohols Amines Water 10.6. Hazardous decomposition products Substance None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological...

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 Contains a chemical or chemicals which can cause birth defects or other reproductive harm. Carcinogenicity:

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 Skin Sensitization

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the...

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 311/312 Hazard Categories: Fire Hazard - No Yes Delayed Hazard - EPCRA 311/312 Hazard Classifications (effective January 1, 2018): Physical Hazards Not applicable Health Hazards Reproductive toxicity Respiratory or Skin Sensitization 15.2. State Regulations Contact 3M for more information. WARNING: This product contains a chemical known to the State of California to cause cancer. WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. 15.3. Chemical Inventories...

3M(TM) Marine Adhesive Sealant Fast Cure 4000 UV, White, PN05280 whether it is fit for a particular purpose and suitable for user's method of use or application. 3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from3M 3M USA SDSs are available at www.3M.com