3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 Safety Data Sheet Copyright,2016,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 25-7921-7 Version Number: 2.01 1.1. Product identifier 3M(TM) Polyurethane Adhesive Sealant 5200 White 3M Industrial Adhesives and Tapes Division 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577) Product Identification Numbers 60-4100-0949-6 1.2. Recommended use and restrictions on use Recommended use Sealant 2.1. Hazard classification Respiratory Sensitizer: Category 1A. Skin Sensitizer: Category 1A. Carcinogenicity: Category 1B. 2.2. Label elements Signal word Danger Symbols Health Hazard | Pictograms

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 Hazard Statements May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause cancer. Precautionary Statements General: Keep out of reach of children. Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. In case of inadequate ventilation wear respiratory protection. Wear protective gloves. Contaminated work clothing must not be allowed out of the workplace. Response: IF...

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical...

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up Collect as much of the spilled material as possible....

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray....

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 Flash Point Evaporation rate Flammability (solid, gas) Flammable Limits(LEL) Flammable Limits(UEL) Vapor Pressure Vapor Density Density Specific Gravity Solubility In Water Solubility- non-water Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Hazardous Air Pollutants Molecular weight Percent volatile VOC Less H2O & Exempt Solvents No flash point No Data Available Not Classified No Data Available No Data Available No Data Available No Data Available 1.36 g/ml 1.36 [Ref Std: WATER=1] No...

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: May be harmful if inhaled. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest. Skin Contact: Allergic...

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16

Specific Target Organ Toxicity - repeated exposure

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 Aspiration Hazard Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its...

3M(TM) Polyurethane Adhesive Sealant 5200 White 08/29/16 Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Zinc Oxide (ZINC COMPOUNDS) 1314-13-2 Diethylene Glycol Monoethyl Ether Acetate 112-15-2 (GLYCOL ETHERS) Toluene Diisocyanate 26471-62-5 Toluene Diisocyanate (Benzene, 1,3- 26471-62-5 This material contains a chemical which requires export notification under TSCA Section 12[b]: Ingredient (Category if applicable) Toluene Diisocyanate (Benzene, 1,3-diisocyanatomethyl-) Toluene Diisocyanate Regulation Status Toxic...