1. Catalogs
  2. 3M
  3. 3M™ Specialty Adhesive Remover
video corpo

3M™ Specialty Adhesive Remover

3M™ Specialty Adhesive Remover
1 / 17 PagesView full catalog

3M™ Specialty Adhesive Remover

Product catalog summary
Identification
Product: 3M™ Specialty Adhesive Remover, PN 38984 is used for removing automotive adhesives. It is manufactured by 3M, Automotive Aftermarket Division, St. Paul, MN, USA. For emergencies, contact 1-800-364-3577.
Hazard Identification
This product is classified as a flammable liquid and poses several health risks including acute toxicity, serious eye and skin irritation, aspiration hazard, reproductive toxicity, carcinogenicity, and mutagenicity. It is labeled with the signal word 'Danger' due to its potential to cause serious health effects.
Composition/Information on Ingredients
Key ingredients include Acetone, Xylene, and other petroleum distillates. Specific concentrations are proprietary.
First Aid Measures
For inhalation, move to fresh air and seek medical attention if needed. In case of skin contact, wash with soap and water. For eye contact, flush with water for at least 15 minutes. If swallowed, do not induce vomiting and seek immediate medical attention.
Fire-Fighting Measures
Use dry chemical or carbon dioxide to extinguish fires. Containers may explode when heated, so full protective gear and self-contained breathing apparatus are recommended.
Accidental Release Measures
Evacuate the area and avoid ignition sources. Use absorbent materials for cleanup and dispose of according to regulations.
Handling and Storage
Avoid confined spaces and use non-sparking tools. Store in a cool, well-ventilated area away from heat and oxidizing agents.
Exposure Controls/Personal Protection
Use ventilation to control exposure. Wear indirect vented goggles, polymer laminate gloves, and respirators for organic vapors if necessary.
Specifications
The product has a boiling point of 59.6 ºC, a flash point of -1 ºF, and a vapor pressure of 154.8 mmHg at 20 ºC. It is 100% volatile with a VOC content of 551 g/l.
Stability and Reactivity
Stable under normal conditions but may react with strong oxidizing agents. Avoid heat, sparks, and flames.
Toxicological Information
Exposure can cause respiratory tract irritation, central nervous system depression, and severe eye and skin irritation. Contains carcinogens like benzene and cumene.
Acute Toxicity Data
Acetone has an LD50 of >15,688 mg/kg in rabbits and an LC50 of 76 mg/l in rats. Xylene and ethylbenzene also show varying toxicity levels.
Carcinogenicity and Reproductive Toxicity
Contains potential carcinogens and may affect reproductive health.
Mutagenicity
Some components have shown positive results for mutagenicity in vitro.
Target Organ Effects
Repeated exposure may affect the central nervous system, auditory system, liver, and kidneys.
Ecological and Disposal Information
Contact details are provided for ecotoxicological information. Disposal should comply with regulations, with incineration recommended.
Regulatory Information
Complies with US Federal Regulations, including EPCRA 311/312 and TSCA. Some chemicals are subject to reporting under Section 313.
Other Information
Includes NFPA hazard classifications and a disclaimer on user responsibility for product suitability.
See more

Catalog excerpts

3M™ Specialty Adhesive Remover-1

3M™ Specialty Adhesive Remover, PN 38984 Safety Data Sheet Copyright,2021, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: Issue Date: Version Number: Supercedes Date: SECTION 1: Identification 1.1. Product identifier 3M™ Specialty Adhesive Remover, PN 38984 Product Identification Numbers 60-4550-5201-3 7000148209 1.2. Recommended use and restrictions on use Recommended use Automotive, Adhesive Remover 1.3. Supplier’s details MANUFACTURER: DIVISION: ADDRESS: Telephone: 3M Automotive Aftermarket 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Flammable Liquid: Category 2. Acute Toxicity (inhalation): Category 4. Serious Eye Damage/Irritation: Category 2A. Skin Corrosion/Irritation: Category 2. Aspiration Hazard: Category 1. Reproductive Toxicity: Category 1B. Carcinogenicity: Category 1A. Germ Cell Mutagenicity: Category 1B. Specific Target Organ Toxicity (single exposure): Category 1. Specific Target Organ Toxicity (single exposure): Category 3. Specific Target Organ Toxicity (repeated exposure): Category 1. __________________________________________________________________________________________ Page

 Open the catalog to page 1
3M™ Specialty Adhesive Remover-2

3M™ Specialty Adhesive Remover, PN 38984 2.2. Label elements Signal word Danger Symbols Flame | Exclamation mark | Hazard Statements Highly flammable liquid and vapor. Causes serious eye irritation. Causes skin irritation. Harmful if inhaled. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. May damage fertility or the unborn child. May cause cancer. May cause genetic defects. Causes damage to organs: sensory organs | Causes damage to organs through prolonged or repeated exposure: nervous system | May cause damage to organs through prolonged or repeated exposure:...

 Open the catalog to page 2
3M™ Specialty Adhesive Remover-3

3M™ Specialty Adhesive Remover, PN 38984 Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Do NOT induce vomiting. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician....

 Open the catalog to page 3
3M™ Specialty Adhesive Remover-4

3M™ Specialty Adhesive Remover, PN 38984 medical attention. Eye Contact: Immediately flush with large amounts of water for at least 15 minutes. Immediately get medical attention. If Swallowed: Do not induce vomiting. Remove contact lenses if easy to do. Continue rinsing. Get immediate medical attention. 4.2. Most important symptoms and effects, both acute and delayed Aspiration pneumonitis (coughing, gasping, choking, burning of the mouth, and difficulty breathing). Central nervous system depression (headache, dizziness, drowsiness, incoordination, nausea, slurred speech, giddiness, and unconsciousness)....

 Open the catalog to page 4
3M™ Specialty Adhesive Remover-5

3M™ Specialty Adhesive Remover, PN 38984 follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Do not use in a confined area with minimal air exchange. Keep out of reach of children. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Take precautionary measures...

 Open the catalog to page 5
3M™ Specialty Adhesive Remover-6

3M™ Specialty Adhesive Remover, PN 38984 ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray....

 Open the catalog to page 6
3M™ Specialty Adhesive Remover-7

3M™ Specialty Adhesive Remover, PN 38984 Vapor Pressure Vapor Density Density Specific Gravity Solubility In Water Solubility- non-water Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Hazardous Air Pollutants Volatile Organic Compounds Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents 154.8 mmHg [@ 20 ºC] No Data Available 0.81 g/ml 0.81 [Ref Std:WATER=1] No Data Available No Data Available No Data Available No Data Available No Data Available No Data Available 37.62 % weight [Test Method:Calculated] 551 g/l [Test...

 Open the catalog to page 7
3M™ Specialty Adhesive Remover-8

3M™ Specialty Adhesive Remover, PN 38984 Inhalation: Harmful if inhaled. Respiratory Tract Irritation: nose and throat pain. Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and May cause additional health effects (see below). Skin Contact: May be harmful in contact with skin. Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain. May cause additional health effects (see below). Eye Contact: Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy...

 Open the catalog to page 8

Archived catalogs

  1. Elite Series

    8  Pages

  2. Flexible Foam

    4  Pages

  3. Sharpshooter?

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.